What are the colors of the VTEC Pressure Switch wires on the plug? 96 DX with Z6 head and ECU (Boomslang harness). I cut the clip off a 92-95 VTEC engine harness. It was the only green plug that would fit the Pressure Switch. Has blue/black and solid black wires.
I just need to know if its the right clip, and what color wire goes to the ECU. I have the solid black going to the ground on the thermostat and am throwing CEL 22. Yes, I've searched, a lot.
Whoopee Doo Racing: MFactory, Rocket Motorsports, Action Clutch, Torco MFactory North American Installer
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.