i need the info for the following feilds for my dyno program...
i have the d16z6 motor
the program is Dyno 2000
what does it mean when it says block
stock bore in inches
stock stroke in inches
cyl volume in cc
total volume in cubic inches
induction manifold type
induction flow in cfm
cam specs, seat to seat timing
93 del sol si b18c-t
see my project teggy [url="http://www.honda-tech.com/zerothread/2208569"]http://www.honda-tech.com/zerothread/2208569[/url]
stock bore in inches= 2.95"
stock stroke in inches= 3.54"
cyl volume in cc= 34.6cc
total volume in cubic inches=??
induction manifold type=single throttle body,multi port injection
induction flow in cfm=about 160cfm@28"
camshaft type=Sohc solid
camshaft liters=? is that lifters or liters?
cam specs, seat to seat timing=??
int lift@valve= .384
exh lift@valve= .370
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.