D16Y8 OBD2b ECU pinouts for the primary O2 sensor?
05-01-2008, 10:02 AM
#1
Honda-Tech Member
Thread Starter
D16Y8 OBD2b ECU pinouts for the primary O2 sensor?
I believe my harness is messed up and I was wondering if anyone had or knew where to get the ECU pinouts for the primary O2 sensor....
-Grant
-Grant
05-02-2008, 09:26 AM
#3
Honda-Tech Member
http://technet.ff-squad.com/wiring.obd2b.htm
C1 & C16 are labeled on that. C18 should also be the ground for it. And the last wire is the Yellow/Black wire that is tied in with quite a few different sensors (like the injectors).
C1 & C16 are labeled on that. C18 should also be the ground for it. And the last wire is the Yellow/Black wire that is tied in with quite a few different sensors (like the injectors).
05-02-2008, 11:02 AM
#4
Honda-Tech Member
Thread Starter
Re: (CivicSpoon)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CivicSpoon »</TD></TR><TR><TD CLASS="quote">http://technet.ff-squad.com/wiring.obd2b.htm
C1 & C16 are labeled on that. C18 should also be the ground for it. And the last wire is the Yellow/Black wire that is tied in with quite a few different sensors (like the injectors).</TD></TR></TABLE>
You're my freakin' hero!!!
C1 & C16 are labeled on that. C18 should also be the ground for it. And the last wire is the Yellow/Black wire that is tied in with quite a few different sensors (like the injectors).</TD></TR></TABLE>
You're my freakin' hero!!!
Thread
Thread Starter
Forum
Replies
Last Post
Hanmin
Honda Civic / Del Sol (1992 - 2000)
3
08-02-2008 11:33 AM
EX-T
Honda Civic / Del Sol (1992 - 2000)
12
05-24-2008 08:01 PM
