Cylinder Head Identification
#1
Cylinder Head Identification
I recently bought a 96 Civic HX that has a swapped motor and I have identified the block and transmission. I'm not sure where to look for the casting number for the cylinder head. If someone could point me in the right direction I'd appreciate it.
#2
Re: Cylinder Head Identification
#3
Re: Cylinder Head Identification
Also when I replaced the distributor cap I had to use the one for a 1.8 GSR. Would it be safe to assume that the distributor is off a 1.8 motor?
#4
Re: Cylinder Head Identification
#5
Re: Cylinder Head Identification
#6
Honda-Tech Member
Re: Cylinder Head Identification
This is random, but does your car have the oem hood on it? Are there any grease pen markings on the underside of the hood?
1996 was an odd year trying to get some feedback from other 96 owners
1996 was an odd year trying to get some feedback from other 96 owners
#7
Re: Cylinder Head Identification
No the body is a 96HX. The hood, bumper, fenders, headlights and taillights are all off of a 2000. I'll take some pictures in the morning. What exactly are you trying to figure out, if you don't mind me asking?
Trending Topics
#8
#10
Honda-Tech Member
Re: Cylinder Head Identification
In 1996 the cars built in the liberty plant had date stampings on the shock tower, hx models had the stampings on the drivers and passengers side shock towers.
My 96 hx has assembly markings and inspector markings on the underside of the hood, on the gas tank, on the rear lower control arms. My car is completely oem so I noticed them
https://honda-tech.com/honda-civic-d...kings-3240645/
I was hoping you could add some info as 96 hx coupes in manual might have all had similar markings, or not. Trying to find more info
My 96 hx has assembly markings and inspector markings on the underside of the hood, on the gas tank, on the rear lower control arms. My car is completely oem so I noticed them
https://honda-tech.com/honda-civic-d...kings-3240645/
I was hoping you could add some info as 96 hx coupes in manual might have all had similar markings, or not. Trying to find more info
#12
Honda-Tech Member
Re: Cylinder Head Identification
Thread
Thread Starter
Forum
Replies
Last Post
boomersz
Honda Civic / Del Sol (1992 - 2000)
7
09-11-2007 06:01 PM