EG-SIXV-TEC

Ive been searching what would be a best custom by using the stock air intake box.
I was thinking of using a regular LS stock intake box, By just cutting out the top portion of the box so leaving the filter part exposed.

Ive seen those ARC looking ones with the top and filter in a box and i had that idea with the stock box cutting top portion would that work?
or any custom air intake Advices sort ram etc?



Iv been also searching for custom LS intake boxes online but cant seem to find some. Also Please post your custom intake box

chinochanginc

cut out the bottom half of ur stock one.. with an k&N drop in

or

man up and get a cold air

mattliston

dont cut the top. the intake air comes from under the filter, through it, over the filter and into the throttlebody. cutting the top will result in UN filtered air getting into teh motor. not so good lol

98civhatch

http://www.clubintegra.com/board/showthread.php?t=10918

i found this in another thread and though it was pretty cool, somethin you might wanna check out

92ehatch

take out the resonator and drop in K&N it will perform just as good as any cold air and will be safer as well.

i like the stock look better than an intake arm anyways

ej1love

OP what i did was use a sri tube, a k+n drop in filter, and took the lines out the top the box and cut swiss cheese in the bottom portion...

a cold air isnt even better, ive used all 3 variations already.

jtmartin96civic

Cause CAI's are such a manly modification. lolz.

ej1love

lol

b16crxsir2

I have a cold air intake and made my own Hot air blocker next to it.





If you want to see how I made it: How To: Automotive - How I make my own hot air blocking panel for intake air filter.

eghatch9295

iTrader: (1)

spam ***** thread necroing dick! 3 threads, 4-10 years old. die.

b16crxsir2

How is this spam? I am posting useful information for people to use.

eghatch9295

iTrader: (1)

so post your own diy, dont **** up the forum bumping every VERY dead thread you can find that relates to your work.