Crank Pully
11-08-2007, 02:44 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2004
Posts: 578
Likes: 0
Received 0 Likes
on
0 Posts
Crank Pully
I'm about to to my valve lash soon here. According to helms after doing the valve lash, your supposed to retorque the crank pully bolt. Is it really that necessary?
11-08-2007, 03:01 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Oct 2004
Posts: 578
Likes: 0
Received 0 Likes
on
0 Posts
Re: Crank Pully (D16SohcVtec)
I was just curious if anyone actually really does it, I mean the thing is torqued down to 130ft lbs, so you would think just turning it would be that bad.
11-08-2007, 03:04 PM
#4
Honda-Tech Member
Re: Crank Pully (D16SohcVtec)
It doesnt hurt to retorque it but theres no reason to because the bolt never brakes loose. It still holds its 130ft lbs. Now if you break it loose then yes retorque it.
Thread
Thread Starter
Forum
Replies
Last Post
