Crank Position Sensor CEL
02-12-2012, 04:35 PM
#1
Trial User
Thread Starter
Join Date: Feb 2012
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Crank Position Sensor CEL
I have a 1999 Honda Civic Si and my CEL came on and it is displaying the code for the Crank Position Sensor. I replaced the sensor and what do you know, it's still spitting out the code. The engine seems to run fine until it get's up to around 3600 RPM's then it starts stuttering and doesn't want to go at ALL.
If anyone has any suggestions on what else could be tripping the Crank Sensor code that would be awesome!
Thx
Adam
If anyone has any suggestions on what else could be tripping the Crank Sensor code that would be awesome!
Thx
Adam
02-12-2012, 05:23 PM
#2
Technical Hero
Join Date: May 2002
Location: Charlotte, NC, 28227
Posts: 9,876
Likes: 0
Received 28 Likes
on
20 Posts
Re: Crank Position Sensor CEL
The crank position sensor is inside the distributor and isn't replaceable. You have to replace the distributor. This sensor you replaced was probably the crank fluctuation sensor by the crank pulley.
11-02-2019, 06:25 PM
#4
Trial User
Join Date: Oct 2019
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Re: Crank Position Sensor CEL
I have a 1999 Honda Civic Si and my CEL came on and it is displaying the code for the Crank Position Sensor. I replaced the sensor and what do you know, it's still spitting out the code. The engine seems to run fine until it get's up to around 3600 RPM's then it starts stuttering and doesn't want to go at ALL.
If anyone has any suggestions on what else could be tripping the Crank Sensor code that would be awesome!
Thx
Adam
If anyone has any suggestions on what else could be tripping the Crank Sensor code that would be awesome!
Thx
Adam
Hey did u ever figuere out what was the problem w your civic ?? Im going trew same situation w my 89 honda crx . seems to run fine when i gt to 3300 rpm its doesnt wanna go anywhere. ???
Thread
Thread Starter
Forum
Replies
Last Post
