code 22, vtec solenoid pressure switch on JDM B18C, code wont go away
09-01-2007, 03:00 PM
#1
* B A N N E D *
Thread Starter
Join Date: May 2007
Location: N1Concepts, Ca, USA
Posts: 3,552
Likes: 0
Received 0 Likes
on
0 Posts
code 22, vtec solenoid pressure switch on JDM B18C, code wont go away
i recently swapped in my 98 spec jdm ITR motor and used a JDM ITR engine harness in my EG6
i got a CEL for code 22, VTEC Oil Pressure Switch defective circuit or unplugged / defective oil pressure switch
* invalid code for non-VTEC engine
it's plugged in for sure, so i thought it might be defective, so i swapped it with another one
i start the car and the code is still on
i know the vtec solenoid i replaced with is good for sure, so is there a speical way to get rid of the code? i already unplugged battery for a couple mins
problem solved, just had to tap wires A4 and D6 together, thanks rywire
Modified by n1_egsex at 12:00 PM 9/3/2007
i got a CEL for code 22, VTEC Oil Pressure Switch defective circuit or unplugged / defective oil pressure switch
* invalid code for non-VTEC engine
it's plugged in for sure, so i thought it might be defective, so i swapped it with another one
i start the car and the code is still on
i know the vtec solenoid i replaced with is good for sure, so is there a speical way to get rid of the code? i already unplugged battery for a couple mins
problem solved, just had to tap wires A4 and D6 together, thanks rywire
Modified by n1_egsex at 12:00 PM 9/3/2007
Thread
Thread Starter
Forum
Replies
Last Post
PnkRokCountryboy
Hybrid / Engine Swaps
4
09-02-2007 02:21 PM
PnkRokCountryboy
Tech / Misc
3
09-02-2007 01:06 PM
Sleepy_Red_hatch
Honda Civic / Del Sol (1992 - 2000)
11
10-16-2006 07:42 AM
Fuster_Cluck
Tech / Misc
6
05-15-2003 10:05 AM
