Clutch pedal grabbing really low to floor
04-02-2006, 01:54 PM
#1
Thread Starter
Join Date: Jan 2005
Location: Brampton, on, Canada
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Clutch pedal grabbing really low to floor
Hey guys! I've got a 92 4dr. 1.5L and the clutch pedal is grabbing like right at the floor. And the shifting is really hard. Is this a clutch problem, or a slave cylinder problem?
04-02-2006, 02:01 PM
#3
Member
Join Date: Oct 2004
Location: back in, nj, USA
Posts: 2,294
Likes: 0
Received 0 Likes
on
0 Posts
Re: Clutch pedal grabbing really low to floor (timntam)
might be slave cylinder...check the clutch reservior to see if its full or not...if not u might just need some clutch fluid..if full it could be the slave cylinder
04-02-2006, 02:33 PM
#4
Thread Starter
Join Date: Jan 2005
Location: Brampton, on, Canada
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Re: Clutch pedal grabbing really low to floor (crazi_E)
Yeah the fluid is still there. At first is was low, but then I added, and it still does the same thing. 
04-02-2006, 02:37 PM
#5
Honda-Tech Member
Join Date: Aug 2005
Location: dubbin, land
Posts: 2,473
Likes: 0
Received 0 Likes
on
0 Posts
Re: Clutch pedal grabbing really low to floor (timntam)
check for leak on the inside where the clutch pedal is see if there is clutch fluid leakin out of the seal
04-02-2006, 02:48 PM
#6
Honda-Tech Member
Join Date: Jul 2005
Location: Da Big Ville, KY, USA
Posts: 599
Likes: 0
Received 0 Likes
on
0 Posts
Re: Clutch pedal grabbing really low to floor (BALLIN H22 EK)
also, you can adjust the rod on the slave cylinder where the rod connects to the pedal under the dash to where all the threads are all furthest away from the pedal as possible so taht the rod goes into the slave cylinder as far as possible... 
04-02-2006, 04:11 PM
#7
Honda-Tech Member
Join Date: Mar 2004
Location: USA
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
Re: Clutch pedal grabbing really low to floor (timntam)
When mine did this it was the slave cylinder. Or you have a leak somewhere along the line. Fluid just doesn't normally disappear. Not saying these are the only two scenarios, but check them out.
Trending Topics
04-02-2006, 04:21 PM
#8
Honda-Tech Member
Join Date: Nov 2004
Location: Los Angeles, CA, USA
Posts: 642
Likes: 0
Received 0 Likes
on
0 Posts
Have someone press the clutch pedal while the car is off and check how far the slave cylinder is traveling, If it hardly moves, I recommend replacing it. I that doesn't do it replace the master.
Has the clutch ever been replaced? How long ago? If not maybe it time to replace it.
Has the clutch ever been replaced? How long ago? If not maybe it time to replace it.
Thread
Thread Starter
Forum
Replies
Last Post
themow
Honda Civic / Del Sol (1992 - 2000)
5
09-16-2012 07:51 AM
DA_RS
Honda Civic / Del Sol (1992 - 2000)
3
08-22-2007 06:57 PM
