checking Valve Lash
11-03-2004, 12:57 PM
#2
Honda-Tech Member
11-03-2004, 01:26 PM
#3
Mr. Badwrench
Join Date: May 2002
Location: stranger in a strange land
Posts: 14,146
Likes: 0
Received 2 Likes
on
2 Posts
Re: checking Valve Lash (Soon_2b_evil)
you need a feeler gauge.
if you know what you are doing, a standard set will work fine. i have a set of " go-no go" gauges and they are priceless. they have a step in them. low side is like .006 high is .008. if the 6 goes in and stops at 8 you know you are at 7. easy.
ill see if i can get a pic of them.
go no go's on kd tools.
if you know what you are doing, a standard set will work fine. i have a set of " go-no go" gauges and they are priceless. they have a step in them. low side is like .006 high is .008. if the 6 goes in and stops at 8 you know you are at 7. easy.
ill see if i can get a pic of them.
go no go's on kd tools.
Thread
Thread Starter
Forum
Replies
Last Post
spidermancivic
Honda Civic / Del Sol (1992 - 2000)
1
12-02-2005 11:21 PM
Eric R
Acura Integra Type-R
8
05-01-2003 07:51 PM