Check engine light
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Sicklerville, NJ
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Check engine light
Just did a auto to manual tranny swap on my 95 honda civic
when i started the car i had a DTC code 2-2 and my SRS light was on...
looked up code 2-2 and its a SRS problem, this happen to anyone? dont even know where to start looking
when i started the car i had a DTC code 2-2 and my SRS light was on...
looked up code 2-2 and its a SRS problem, this happen to anyone? dont even know where to start looking
#2
Honda-Tech Member
Re: Check engine light
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/how-pull-cel-d4-srs-abs-codes-code-lists-1901557/
are you saying that you followed this and got code 22? im confused on your question
are you saying that you followed this and got code 22? im confused on your question
#3
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Sicklerville, NJ
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Re: Check engine light
no i jumped the wires and got 2 fast blinks and 2 slow, so thats CEL 2-2 for SRS... but it wasnt there before i did my auto to manual swap... so idk where to start looking to fix the SRS problem
#4
Honda-Tech Member
Re: Check engine light
your check engine light does not come on for the airbag system. the SRS light would illuminate if there was a problem with that system.
#5
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Sicklerville, NJ
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Re: Check engine light
my SRS light is illuminated, and when i went to alldata.com to check code 2-2 it was for SRS problem. so both lights are on for the same thing, idk where to start looking for a problem like that
#7
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Sicklerville, NJ
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Re: Check engine light
i checked the list and 22 is for a vtech pressure valvle... my car is not vtech tho. when i did the auto to manual swap tho i just cut a wire to the automatic solenoid, think that would have anything to do with it?
Trending Topics
#8
Honda-Tech Member
Join Date: Oct 2004
Location: Lawton, OK
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
Re: Check engine light
what manual ECU did you put in to replace your old auto ECU? if it is a P28 for instance that is a VTEC ecu on a non VTEC harness and could be causing your CEL. i would expect other codes as well though.
cutting your auto trans. solenoid wires would not cause this.
cutting your auto trans. solenoid wires would not cause this.
#9
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Sicklerville, NJ
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Re: Check engine light
oh yeah good point, i did put in a P28 so that makes sense now thx man. i just gotta figure out this SRS problem now
Thread
Thread Starter
Forum
Replies
Last Post