Mason Dixon

1998 Civic LX has a crack in the exhaust manifold. Its very loud on the road and exhaust comes in the vents when I'm stopped.

I was told that the cat is part of the system and is costly to replace. Whats the cheapest way to get my exhaust working properly again?

bgdriver

buy $30 header from ebay and install.

mikekh10a

iTrader: (2)

or looking off the craigslist classifieds for a compatible exhaust manifold

doublezerohatch

hit it with a welder at your buddies place . . .. .

sleepyaccord96

weld it and search for a used one

street93eg

Use E6011 on the manifold since it is cast. This rod works great for this task on a budget. Other cheap method is find a friend with a MIG welder, use CO2 and just some plain wire and weld it back together.

doublezerohatch

hit it with a welder at your buddies .. use any electric metal melting technology he has . . . arc . . .mig . . .hit that crack

Mason Dixon

This looks to be the cheapest I can find, would this work? Just bolts up to flange on top of the cat? Is it easy to swap out o2 sensors?

http://www.ebay.com/itm/1-6-HONDA-CI...e59170&vxp=mtr

street93eg

As long as the O2 sensor from the factory wasn't stuck on there with cold weld it should come right out. Have had issues like that before on other cars.

Mason Dixon

It looks like it is screwed in.

Do you usually change the gaskets when doing this?

Just to make sure, mine has the cat right below the manifold. These aren't welded together, correct?

lostforawhile

Cat is part of the manifold,dont weld it because it will crack again, this is a common issue, you can do the header and swap exhaust but i cant remember the year

Mason Dixon

So with the the header in the above ebay link, I can just sit that atop the cat as shown in this diagram? The header and cat are not one unit and can be swapped out?

doublezerohatch

have a look at the picture . .. do you see bolts holding the cat to the header ???? Noooo why you ask ???? just like when you look at your car the header and cat are 1 piece . . .look at the picture u posted

bgdriver

You will lose your cat with this method. They usually come with all new gaskets.

lostforawhile

there is another entire factory exhaust with a separate cat that is supposed to bolt in

Miguel613ekb18c

Go to a junk yard pick one up for cheap no more than 40 bucks prolly less if u pull it ur self