car wont start after a new clutch and transmission install.
10-18-2007, 09:55 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: Los Angeles CA, Houston TX
Posts: 4,605
Likes: 0
Received 0 Likes
on
0 Posts
car wont start after a new clutch and transmission install.
did a search but nothing related to my problem.
ok I installed a new clutch and replaced the tranny, after this the car will not turn over and start
1. I've jump started the car still wont turn over
2. check all the grounds and wiring and they are fine
could it be the dizzy? starter?
any input will help.
ok I installed a new clutch and replaced the tranny, after this the car will not turn over and start
1. I've jump started the car still wont turn over
2. check all the grounds and wiring and they are fine
could it be the dizzy? starter?
any input will help.
10-18-2007, 10:21 AM
#3
HRD PKR
Join Date: Nov 2005
Location: Gods wonderland
Posts: 13,211
Likes: 0
Received 0 Likes
on
0 Posts
Re: car wont start after a new clutch and transmission install. (speedooo)
either way you put the wire on the starter it will still work... and sounds like the starter isnt engauging..... it just cranks thats it??
Thread
Thread Starter
Forum
Replies
Last Post
Armando Galvan
Acura RSX DC5 & Honda Civic EP3
3
11-02-2012 02:38 PM
2006, car, civic, clutch, crank, honda, install, installation, installing, put, putting, start, transmission, turn, wont
