Car wont rev past 2k on any chipped ecu's hondata s300 s200 chrome pro
10-07-2008, 03:36 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: NOVA, VA
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Car wont rev past 2k on any chipped ecu's hondata s300 s200 chrome pro
OK so a couple of days agao i got my car tuned on hondata s200, all goes well then it starts running like crap and losses 40whp on the dyno so we took it off
- Next day i start it up to see if anything changes ( still runs the same)
- so i change the spark plugs with some fresh ngk's
- I go to start it up again and it runs even worse and wont rev past 2k
- usually thats a sign of limp mode or some sort of problem with the ecu
- next i swap it over with a stock h22 ecu and it revs up fine
- thinking it must be the hondata i call the tuner and he reloads the map
- still the same problem
- so i go buy another s200 thinking it would fix the problem and it doesnt fix it
- so i buy chrome pro and another chipped ecu and that doesnt fix the problem
- so after that i decide to get a hondata s300 and use that, so i order one from inline pro and load a stock h22 basemap on it and it still runs the same
- so now im getting pissed because i dished out a lot of money and a stock p13 will work but a s300 with a p13 map wont
- also i decided to put the ecus in a friends car (not h22) and they all start and run the car fine
- so now i have 2 s200 1 chrome pro and 1 s300 and cant seem to figure out what could cause my car to read one ecu but not another
i have no cels or any wiring issues - although when i loaded the s300 the code 20 for eld came on but i cleared it and it hasnt come back since
also anyone looking for a s200 lmk
Update: injectors were peak and hold, so i replaced them with known saturated 550cc injectors and still nothing, i also got some 750cc saturated ones that said SL also and it still would only rev to 2k
- as a last resort i installed the stock injectors back in loaded a stock h22 map on the s300 and tried to start it and no such luck still a 2k rev limit, its exactly the same with the chrome pro ecu the two s200's and the s300 however it runs perfect on the stock p13
i really dont want to be forced to take my turbo kit off
Modified by marcusgnf at 1:17 AM 10/12/2008
- Next day i start it up to see if anything changes ( still runs the same)
- so i change the spark plugs with some fresh ngk's
- I go to start it up again and it runs even worse and wont rev past 2k
- usually thats a sign of limp mode or some sort of problem with the ecu
- next i swap it over with a stock h22 ecu and it revs up fine
- thinking it must be the hondata i call the tuner and he reloads the map
- still the same problem
- so i go buy another s200 thinking it would fix the problem and it doesnt fix it
- so i buy chrome pro and another chipped ecu and that doesnt fix the problem
- so after that i decide to get a hondata s300 and use that, so i order one from inline pro and load a stock h22 basemap on it and it still runs the same
- so now im getting pissed because i dished out a lot of money and a stock p13 will work but a s300 with a p13 map wont
- also i decided to put the ecus in a friends car (not h22) and they all start and run the car fine
- so now i have 2 s200 1 chrome pro and 1 s300 and cant seem to figure out what could cause my car to read one ecu but not another
i have no cels or any wiring issues - although when i loaded the s300 the code 20 for eld came on but i cleared it and it hasnt come back since
also anyone looking for a s200 lmk
Update: injectors were peak and hold, so i replaced them with known saturated 550cc injectors and still nothing, i also got some 750cc saturated ones that said SL also and it still would only rev to 2k
- as a last resort i installed the stock injectors back in loaded a stock h22 map on the s300 and tried to start it and no such luck still a 2k rev limit, its exactly the same with the chrome pro ecu the two s200's and the s300 however it runs perfect on the stock p13
i really dont want to be forced to take my turbo kit off
Modified by marcusgnf at 1:17 AM 10/12/2008
10-10-2008, 04:14 PM
#6
Honda-Tech Member
Join Date: Mar 2008
Location: westminester, co, 80020
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Re: Car wont rev past 2k on any chipped ecu's hondata s300 s200 chrome pro (marcusgnf)
im looking toward buying one for my turbo civic b18b1 but im new to the game i just really want to know the different between the 300 and 200 series? and which will give me the gain and will a 200 work fine and how much for yours??
10-11-2008, 04:15 PM
#7
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: NOVA, VA
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Re: Car wont rev past 2k on any chipped ecu's hondata s300 s200 chrome pro (xiongtoua1990)
pm me for a price check hondata.com or search on here for s200 vs s300 or do a google search plenty of info on the differences between the two, mainly real time datallogging
Trending Topics
10-11-2008, 04:18 PM
#8
Honda-Tech Member
Join Date: Mar 2006
Location: NinePennyNine, NC, United States
Posts: 744
Received 0 Likes
on
0 Posts
Re: Car wont rev past 2k on any chipped ecu's hondata s300 s200 chrome pro (marcusgnf)
I'll ****** one of those S200 pm me with anything you are looking for I have lots of rare items and turbo stuff laying around but a wife and daughter that I traded all my money for.
oh and consequently have you tried another dizzy just for ***** and giggles? And maybe another fusebox (isn't that where the ELD is located?)
oh and consequently have you tried another dizzy just for ***** and giggles? And maybe another fusebox (isn't that where the ELD is located?)
Thread
Thread Starter
Forum
Replies
Last Post
marcusgnf
Engine Management and Tuning
21
10-15-2008 08:10 AM
