92eg-k

I was wondering if anyone had a DIY? I've seen a few guys taking the rack apart and cutting part of the piston. Any links for a seal kit? I do not want to loop my rack... I'd prefer not to buy a manual rack due to subframe indifference, cost and ratio. Any feedback from anyone who has done this? How is turning effort? Any help would be great, thanks!

PrettyMuchBoned

IV read that people loop the two ends after filling it with fluid. I dont think it drives as nice as a manual rack doe.

HondaPartsHero

https://honda-tech.com/forums/showth...1681&styleid=2
http://m.hondacivicforum.com/forum/s...1749&styleid=7
http://www.jdmuniverse.com/forums/ho...-20-bucks.html

doctorake

Should be easy to trade yours for a manual rack

92eg-k

I do not want to loop the rack. I'm trying to clean the bay up. I've seen a couple of guys open the rack up and do some cutting on what appears to be a piston... Just wanted to know what needs to be done.

92eg-k

I thought the subframes were different. I have a 92 eg si if that makes a difference.

TypeRfit

iTrader: (6)

https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/how-i-converted-manual-rack-3103226/

sohc it to me

you can fit a manual rack onto a power steering subframe. i think a power rack wont fit on a manual subframe.

HondaPartsHero

http://www.d-series.org/forums/diy-f...teezz-way.html

96-00 power and manual subframes are the same and can swap without changing but I believe EG subframes differ.

92eg-k

Thank you, this is what I'm looking for!