how do you take out eg hatch door panels
#1
how do you take out eg hatch door panels
i'm trying to get my side moldings out to re paint them, and i'm not too sure how to get the door panels out.
any write up's on this with pics?
can anyone help me out?
any write up's on this with pics?
can anyone help me out?
#3
Honda-Tech Member
Re: how do you take out eg hatch door panels (93eh2hatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93eh2hatch »</TD></TR><TR><TD CLASS="quote">i'm trying to get my side moldings out to re paint them, and i'm not too sure how to get the door panels out.
any write up's on this with pics?
can anyone help me out?
</TD></TR></TABLE>
basically, unscrew the 3 screws (i think 3). once they have been removed, remove the part they are bolted to like the door handle and the lock trim. then you want to take out the holding clip for the handle to the window, once that's removed the handle slides right out.
once they have been removed, gently pull the panel from the door. be gentle, after a while the plastic dry rotts and can break, leaving the plastic clips still in the door.
if you still can't understand my crazy directions, pick up one of these:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mcvtec »</TD></TR><TR><TD CLASS="quote">A Helms or Haynes manual will tell you.</TD></TR></TABLE>
any write up's on this with pics?
can anyone help me out?
</TD></TR></TABLE>
basically, unscrew the 3 screws (i think 3). once they have been removed, remove the part they are bolted to like the door handle and the lock trim. then you want to take out the holding clip for the handle to the window, once that's removed the handle slides right out.
once they have been removed, gently pull the panel from the door. be gentle, after a while the plastic dry rotts and can break, leaving the plastic clips still in the door.
if you still can't understand my crazy directions, pick up one of these:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mcvtec »</TD></TR><TR><TD CLASS="quote">A Helms or Haynes manual will tell you.</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
SLURS
Honda Civic / Del Sol (1992 - 2000)
13
06-18-2009 01:39 AM