Burnt Valves?
10-10-2008, 10:55 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Aug 2008
Location: Houston, TX, USA
Posts: 1,793
Likes: 0
Received 0 Likes
on
0 Posts
Re: Burnt Valves? (jdmsinglecamdelsol)
Ok, because mine is starting to backfire loudly. but hey! what do you expect with no header. lol it still runs da same though.
10-10-2008, 04:02 PM
#7
H-T White Ops
Join Date: Jun 2003
Location: Nor Cal
Posts: 4,875
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Tjames8864)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tjames8864 »</TD></TR><TR><TD CLASS="quote">haha this thread isnt serious. needs to be deleted some lil *** kid trying to be funny obviously</TD></TR></TABLE>
Actually I just recognized the screen name.
This guy is serious. He tries to do anything and everything that isn't RIGHT to do to an engine/car. Read some of his other masterpieces
Actually I just recognized the screen name.
This guy is serious. He tries to do anything and everything that isn't RIGHT to do to an engine/car. Read some of his other masterpieces
Trending Topics
10-11-2008, 05:40 AM
#9
Honda-Tech Member
Join Date: Mar 2008
Location: Denver, CO, USA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: (sky7)
don't knock too hard on a guy trying crazy stuff. I've owned many many hondas and I have tried some crazy stuff. Looking back , it was some pretty dumb stuff but I learned a TON from it. If its an issue of serious safety, than someone should step in and say something, but if a guy is just messing around then don't knock it. Nobody would ever discover anything new if they weren't messing around.
I would way rather hear about a guy trying something crazy and different than hear about some wuss talking about "takin it into the shop" because they are too afraid of grabbin a manual, some tools, and jumpin in.
more power to ya, my crazy, no-header friend.
I would way rather hear about a guy trying something crazy and different than hear about some wuss talking about "takin it into the shop" because they are too afraid of grabbin a manual, some tools, and jumpin in.
more power to ya, my crazy, no-header friend.
10-11-2008, 06:32 AM
#10
* B A N N E D *
Join Date: Jan 2008
Location: sorry, ca, usa
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
Re: (t0p_sh0tta)
Yea he's serious, he was 1 mm off the ground and ripped the header and studs off the head, then is going to jb welb the studs back in and hope they hole for the 1.5 sec after he turns the engine.
Goodluck.
Goodluck.
10-13-2008, 07:11 AM
#11
Honda-Tech Member
Thread Starter
Join Date: Aug 2008
Location: Houston, TX, USA
Posts: 1,793
Likes: 0
Received 0 Likes
on
0 Posts
Re: (cycopath)
Lol, i fixed it already. half ***. i put new studs and nuts on and they held.
but yea, it sometimes sounds like a 12 gauge shot gun shooting when it backfires. every once in a while. and i was wondering if i warped my exhaust valves.
but yea, it sometimes sounds like a 12 gauge shot gun shooting when it backfires. every once in a while. and i was wondering if i warped my exhaust valves.
Thread
Thread Starter
Forum
Replies
Last Post
SpoonFedHatch
Honda Civic / Del Sol (1992 - 2000)
8
04-26-2004 02:34 PM