Built ls-vtec idle issue
#1
Built ls-vtec idle issue
Im going to post my mod list and then my issue that im having.
Please read!
B18B1
B16A2 Head
Darton sleeves 84mm
Je Turbo Pistons 9:1
Eagle rods
Z10 girldle
Stock re-built head
Stock B16 cams
GE Adj. Timing gears
Phearable Ecu
Rywire harness
Edlebrock victor x intake
Aem fuel rail
Aem 320 fuel pump
Aem afpr
Stock Injectors
Skunk t/b no FITV
New iacv
The first start of the day it cranks for a second and then starts up, i have to hold the idle around 1000rpms for atleast 1 minute before itll idle on its own. Then it idles around 950rpms. Itll idle fine until you get in and drive a few feet push the clutch in and then it has a "cam like" sometimes dying out if you dont hold it at a steady rpm.
My engine timing is dead on.
Please read!
B18B1
B16A2 Head
Darton sleeves 84mm
Je Turbo Pistons 9:1
Eagle rods
Z10 girldle
Stock re-built head
Stock B16 cams
GE Adj. Timing gears
Phearable Ecu
Rywire harness
Edlebrock victor x intake
Aem fuel rail
Aem 320 fuel pump
Aem afpr
Stock Injectors
Skunk t/b no FITV
New iacv
The first start of the day it cranks for a second and then starts up, i have to hold the idle around 1000rpms for atleast 1 minute before itll idle on its own. Then it idles around 950rpms. Itll idle fine until you get in and drive a few feet push the clutch in and then it has a "cam like" sometimes dying out if you dont hold it at a steady rpm.
My engine timing is dead on.
#3
Re: Built ls-vtec idle issue
I have it set to 50psi at idle, its a basemap from phearable. And im kind of unsure how to set the base idle. And no cel.
Thread
Thread Starter
Forum
Replies
Last Post
Spoolinb18c
Engine Management and Tuning
4
01-26-2018 02:03 PM
Integra_Boi
Forced Induction
6
06-08-2003 07:35 PM