DireFire34

I took my blower motor off because it was, and still is, making a ticking type noise when it rotates. I washed it all off because there was a lot of ths black dust type stuff all over but seemed greasy also...do i have to add any lubrucant to the motor inside b4 i hook it up again? is that what the black stuff was or was it just the dust from the magnets inside wearing out?
im putting it back in there till i can get a new one.

Sleepy_Red_hatch

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DireFire34 &raquo;</TD></TR><TR><TD CLASS="quote">I took my blower motor off because it was, and still is, making a ticking type noise when it rotates. I washed it all off because there was a lot of ths black dust type stuff all over but seemed greasy also...do i have to add any lubrucant to the motor inside b4 i hook it up again? is that what the black stuff was or was it just the dust from the magnets inside wearing out?
im putting it back in there till i can get a new one. </TD></TR></TABLE>

what kind of "blower" are we talking supercharger? or one of those gay fan things? concact the manufacturer with the problem, they will tell you what to do

LowSlow93Sol

I think it is the blower for the climate control(heat/ac)

I wouldnt think you need to lube that at all.

Syndacate

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sleepy_Red_hatch &raquo;</TD></TR><TR><TD CLASS="quote">

what kind of "blower" are we talking supercharger? or one of those gay fan things? concact the manufacturer with the problem, they will tell you what to do</TD></TR></TABLE>

No, the fan motor, the blower motor is the fan motor, the one that goes by the "fan settings" of 0,1,2,3,4.

DireFire34

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LowSlow93Sol &raquo;</TD></TR><TR><TD CLASS="quote">I think it is the blower for the climate control(heat/ac)
</TD></TR></TABLE>

yea i meant that sorry, i didnt think of any engine parts for a blower.

ill try to pop the actual motor piece out of the center of the blower mount to see if i can see anything. if not, ill get a new one, they arent cheap tho.

slowcivic2k

no, the bearing in mine is sealed, and requires no lubrication, and it is an OEM unit. periodic inspection should be done to make sure nothing hits the turbine, if that happens it will throw it out of balance and throw little bits and pieces everywhere. I would replace it, its only like 40 bucks at autozone.

DireFire34

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slowcivic2k &raquo;</TD></TR><TR><TD CLASS="quote"> I would replace it, its only like 40 bucks at autozone.</TD></TR></TABLE>

i wished i lived there, they are $65 atleast here