Belt tensioner fail cams rotated 180degrees! helP!
08-23-2010, 08:26 AM
#1
Honda-Tech Member
Thread Starter
Belt tensioner fail cams rotated 180degrees! helP!
Ok so i started my motor after TDC. The engine ran for a few seconds then shutoff. I started it again tried to keep it alive with the throttle, it worked. Then let off the gas and the motor turned off. When i looked at the cam gears after TDC the crank, the cams rotated 180 degrees!!!! up arrow facing down. The belt was also shaking violently. The belt tensioner wasn't torqued down enough.............
what do i do?! New Head? New Valves? Its a B20b non-vtec.
what do i do?! New Head? New Valves? Its a B20b non-vtec.
Thread
Thread Starter
Forum
Replies
Last Post
wunfstgsr
All Motor / Naturally Aspirated
45
11-26-2015 10:43 AM
hondachris1994
Honda Civic / Del Sol (1992 - 2000)
12
08-23-2008 12:17 PM
Just put my engine back together, I look at the timing belt and its loose in between the cam gears??
Thrillhouse
Acura Integra
6
08-07-2004 10:07 AM