b20vtec oil feed
03-05-2008, 06:16 AM
#1
Banned
Thread Starter
Join Date: Mar 2008
Location: san bernardino, ca, us
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
97 ek hatch b18 leak problem
i got a b18 head with b20 block. anyone have the oil feed line on this motor leak? every time i rev the engine i get oil spitting out by the filter (where the bottom end of the oil feed line is). for about 30 seconds oil was pouring out like a faucet and the oil was muddy looking. like when u take the oil pan off. any suggestions for this type of leak?
also there is an LS throttle cable on this motor which is about 6-8 inches too long. very low idle and accelerator gets stuck from the cable drag i guess. any suggestions? oh i forgot, im not sure which ecu to use for this i know its an obd1 but any certain one? whats the point of vtec if the car wasnt factory programmed for it.
any help will be appreciated
**90 ef hatch for sale**
Modified by stevew84 at 7:30 AM 3/5/2008
also there is an LS throttle cable on this motor which is about 6-8 inches too long. very low idle and accelerator gets stuck from the cable drag i guess. any suggestions? oh i forgot, im not sure which ecu to use for this i know its an obd1 but any certain one? whats the point of vtec if the car wasnt factory programmed for it.
any help will be appreciated
**90 ef hatch for sale**
Modified by stevew84 at 7:30 AM 3/5/2008
03-05-2008, 07:17 AM
#2
Re: 97 ek hatch b18 leak problem (stevew84)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stevew84 »</TD></TR><TR><TD CLASS="quote">(1)<FONT COLOR="red">i got a b18 head with b20 block. anyone have the oil feed line on this motor leak? every time i rev the engine i get oil spitting out by the filter (where the bottom end of the oil feed line is).</FONT> for about 30 seconds oil was pouring out like a faucet and the oil was muddy looking. like when u take the oil pan off. any suggestions for this type of leak?
(2)<FONT COLOR="red">also there is an LS throttle cable on this motor which is about 6-8 inches too long. very low idle and accelerator gets stuck from the cable drag i guess. any suggestions?</FONT>(3)<FONT COLOR="red"> oh i forgot, im not sure which ecu to use for this i know its an obd1 but any certain one? whats the point of vtec if the car wasnt factory programmed for it.</FONT>
any help will be appreciated</TD></TR></TABLE>
(1) Inspect the line carefully for breakage, make sure the gasket from the previous oil filter is not sandwiched between the newer filter and the block. Fram filters are infamous for this.
(2) Get a GS-R cable.
(3) GS-R's come with the P72 ecu, IIRC VTEC is set at 4400 rpm. Even though you have a B20 bottom end think of it as B18C ecu wise.
Mc
(2)<FONT COLOR="red">also there is an LS throttle cable on this motor which is about 6-8 inches too long. very low idle and accelerator gets stuck from the cable drag i guess. any suggestions?</FONT>(3)<FONT COLOR="red"> oh i forgot, im not sure which ecu to use for this i know its an obd1 but any certain one? whats the point of vtec if the car wasnt factory programmed for it.</FONT>
any help will be appreciated</TD></TR></TABLE>
(1) Inspect the line carefully for breakage, make sure the gasket from the previous oil filter is not sandwiched between the newer filter and the block. Fram filters are infamous for this.
(2) Get a GS-R cable.
(3) GS-R's come with the P72 ecu, IIRC VTEC is set at 4400 rpm. Even though you have a B20 bottom end think of it as B18C ecu wise.
Mc
Thread
Thread Starter
Forum
Replies
Last Post
turbotypeR@SPEC
Hybrid / Engine Swaps
1
09-08-2003 02:27 PM
