killaj12

sup guys, was wondering if a jdm b16a sir ii is a direct swap for my usdm b16a2 ..

is there anything i would have to change ?
or is it identical motors, using same mounts, etc ?
i'd like to keep ac and power steering, etc

i tried searching, but i didn't know what to search for
any help's appreciated.

BlueIntegraBoy

iTrader: (5)

Why would you want to swap it out? You will need an OBD2 distributor and injectors. Same mounts.

killaj12

doesnt my car already come with obd2 distributor and injectors ? could i reuse those?

si kid

i was wondering the same thing! is it plug in play?

hatch96y7

get a gsr

xhatchracerx

need OBD2 oil pump with crank sensor and you should be good, just take it from your existing B16a2

Timmay

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xhatchracerx &raquo;</TD></TR><TR><TD CLASS="quote">need OBD2 oil pump with crank sensor and you should be good, just take it from your existing B16a2 </TD></TR></TABLE>

unless your using a obd2-1 conversion

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by killaj12 &raquo;</TD></TR><TR><TD CLASS="quote">doesnt my car already come with obd2 distributor and injectors ? could i reuse those?</TD></TR></TABLE>
yes


you will need to use the mounts, distributor, injectors and alternator from your b16a2 if you want a direct bolt in

si kid

sorry if i jacked ur thread but i was wondering also? but thanks and is that all i need?