B16 in Sandrail? wire harness issue
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: Washougal,Wa
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
B16 in Sandrail? wire harness issue
What can i take off the harness to clean it up looks wise? our customer wants a b series on the back of his rail. we can do it, but just curious about the harness. can i take wires off the harness to make it more simple?
heres the rail he wants it on..
heres the rail he wants it on..
#3
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: Washougal,Wa
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16 in Sandrail? wire harness issue (99blackcivicSi)
i'm more then willing, just need a layout of what wires are needed and what aren't.. anyone out there know? holla if ya do.. thanks
#4
Honda-Tech Member
Join Date: Oct 2004
Location: Mesa, AZ, usa
Posts: 978
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16 in Sandrail? wire harness issue (SpoonHatch94cx)
Awesome ive always wanted to do this!
yeah just get the harness plug everything in you need and then take all the extras out. and if your in phx az i for sure wanna see this thing when your done!!
yeah just get the harness plug everything in you need and then take all the extras out. and if your in phx az i for sure wanna see this thing when your done!!
#5
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: Washougal,Wa
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16 in Sandrail? wire harness issue (ThatsMyEG)
yeah the guy we're build'n this for asked for a good powerplant.. i think i have him talked into a turbo gsr...i just don't know if the bus tranny will hold... this actual car is gonna have a 1941cc turbo, but in a week or two he's have'n another one built but a 4 seater.. so that one will be honda powered for sure.. anyone is welcome to come check out the rail.. it is definetly a looker.. just go on our website and look us up... thanks for the info peeps... later~
Modified by SpoonHatch94cx at 3:56 PM 8/19/2005
Modified by SpoonHatch94cx at 3:56 PM 8/19/2005
#7
Honda-Tech Member
just build your own harness with motec or some kinda other stand alone computer... my friends dad used to build sand rails.. he had a twin turbo acura legend v6 motor in it.. and he has always used the motec computer good luck..
Trending Topics
#8
Honda-Tech Member
oh yah the only sensors u need for that is...
throttle position.. map... coolant temp.. o2...idle air controll valve...oil pressure.. and maybe the intake air temp.. so you can pretty much custom make the harness of the b series just split it open and take the connectors u need for it.. good luck with it
throttle position.. map... coolant temp.. o2...idle air controll valve...oil pressure.. and maybe the intake air temp.. so you can pretty much custom make the harness of the b series just split it open and take the connectors u need for it.. good luck with it
#9
Honda-Tech Member
or u can use the microtech system... central florida turbo uses it on thier setups... heres a link to it
http://www.centralfloridaturbo.com/microtech.php
http://www.centralfloridaturbo.com/microtech.php
#10
#12
Re: B16 in Sandrail? wire harness issue (SpoonHatch94cx)
your also going to need the altenator control circut, main relay for the injectors power for the ecu and relay for the ecu. also you need a heavy duty wire for the igniton and alt. they are run from the stock starter switch but you can use a couple of 30a switches from autozone. these are in addition to all of the sensors on the engine.
Thread
Thread Starter
Forum
Replies
Last Post
-Gambit-
Honda Civic / Del Sol (1992 - 2000)
7
09-08-2005 10:12 AM