b16 head + gsr block!!! what timing belt to use?!?!?!?
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Location: ashburn/radford va, usa
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
b16 head + gsr block!!! what timing belt to use?!?!?!?
hey i am building a motor with a b16 head and gsr block.It has a gsr timing belt but when put on was very loose even after tightening it all the way. tried to put a b16 belt on and is too tight ,,,,,no way to get that biatch on there.... gsr head studs, gsr water pump don't know what else to try....PLease help me out i wanna kill myself
#2
Re: b16 head + gsr block!!! what timing belt to use?!?!?!? (ricin4ever)
you might have to change from a 22 teeth water pump to a 19 tooth vis versa and i believe you have to use the gsr timing belt.
#3
Honda-Tech Member
Re: b16 head + gsr block!!! what timing belt to use?!?!?!? (EkFG)
You ALWAYS use the belt to match the BLOCK. GSR belt is what you need. I'd double check your routing, make sure the tensioner is on right (is the one side on the little tip like it should be?). I have a GSR block with B16 head in my wife's coupe right now and the GSR belt fits perfect.
Also, DO NOT use the 19T water pump. These pumps tend to cavitate at high RPM's; that's why Honda put a 22T on it.
Ryan
Modified by RyanA at 2:41 AM 6/21/2008
Also, DO NOT use the 19T water pump. These pumps tend to cavitate at high RPM's; that's why Honda put a 22T on it.
Ryan
Modified by RyanA at 2:41 AM 6/21/2008
#4
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Location: ashburn/radford va, usa
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
i checked everything again and one of my friends told me the coat hanger trick might be needed but i dunno im going to count the teeth on the water pump in the morning
Thread
Thread Starter
Forum
Replies
Last Post
TheThiefTheKnife'NTheGun
Hybrid / Engine Swaps
3
01-25-2005 09:40 PM