b16 distributor question
02-26-2006, 07:03 AM
#1
Member
Thread Starter
Join Date: May 2003
Location: out in the farms, nj, USA
Posts: 2,980
Likes: 0
Received 0 Likes
on
0 Posts
b16 distributor question
ive got a b16a2 obd2 motor in my 92 cx. Its been in for about a year.. Im running a sohc vtec wiring harness that plugs up to the motor.. My dizzy is shot and the dizzy on the car is 2plug.. can i run a d16z6 distributor since there 2 plug or does it have to be a dohc 2plug dizzy only or obd1 i should say..
02-26-2006, 07:07 AM
#2
Honda-Tech Member
Join Date: Feb 2004
Location: York, SC
Posts: 1,033
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16 distributor question (civicrida3)
has to be a b-series dizzy.......a single cam dizzy won't work. But depending what went bad on yours, you can take the internals from the d-series one and put it in the b-series housing.
02-26-2006, 09:19 AM
#3
Member
Thread Starter
Join Date: May 2003
Location: out in the farms, nj, USA
Posts: 2,980
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16 distributor question (shiftgear8000)
yah i did that last week my ignition coil went on my b16 dist swapped it with a z6 now the rotor is broke. im having no luck 
thanks for the response 
thanks for the response
02-26-2006, 10:28 AM
#5
Member
Thread Starter
Join Date: May 2003
Location: out in the farms, nj, USA
Posts: 2,980
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16 distributor question (shiftgear8000)
yah... i figure that out when i took everything apart.. but the icm and igniton coil is compat. thanks man
thanks man
Thread
Thread Starter
Forum
Replies
Last Post
b16, b16a, bseries, cam, coil, distrbutor, distributor, ignition, installation, series, single, vtec, work
