DexterThEG

First of, I know this has to have been covered somewhere and I cannot believe how craptastic the search on this forum is. I think if it were half again better, there would be less repetitive questions for sure.

I've got 3 B-series compressors to choose from and 1 busted D-series compressor, so naturally I'd like to fit the b-series compressor to my EG's A/C system. The question is, will the EG compressor hoses work with the B-series compressor?

One of my B compressors has lines still attached and it seems the integra hoses would not work on the condensor side, especially since they're made for full width condensor.

Do EG guys usually have custom hoses made for this setup? Or perhaps should I just scrap all this crap, and get a new D compressor, since I already have the P54 bracket coming as a contengency.

Also, I've been working on cars for a long time, but not a lot of A/C. Am I supposed to change the dryer even if I throw a used pump on?

My EG was perfect until it got stolen and stripped 3 years ago.. still getting everything back together.

DexterThEG

with some crafty googling, I found this https://honda-tech.com/zero...50494

I really don't like the way those lines look


Modified by DexterThEG at 11:28 PM 6/6/2008