DailyDriven259

ok so first of all I did alot of research but cant seem to find what im looking for.
so I have a canadian 99 civic and im planning to do a headlight harness tuck(around the fenders). On the driver side harness coming out of the cabin there is a connecter that plugs into the very end of the engine harness, what to people do with that?

I live in Canada and we have DRL(daytime running lights) I have a DRL resitor box on the driver side behind strut tower.. can I just relocate that in the cabin? when the DRL are on the box becomes hot.

I am also relocating my fuse box only problem is what to people do with the alternator wire and the starter wire(battery)

thanks DD

apexi_rsx

when i did my tuck the plug tht went to the engine harness i pulled thru the hole in the lower shock tower.

ynaffit509

clean

crx_si-r

as long as you lengthen the wires evenly you should be fine with relocating the resistor for the DRL