Notices
Honda Civic / Del Sol (1992 - 2000) EG/EH/EJ/EK/EM1 Discussion

1998 Honda Civic Auto, CEL Codes, P0700, and P1706, Please Help.

Old 06-09-2008, 10:26 PM
  #1  
Honda-Tech Member
Thread Starter
 
theprofiteer's Avatar
 
Join Date: Jul 2007
Location: Lawrenceville, GA, USA
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default 1998 Honda Civic Auto, CEL Codes, P0700, and P1706, Please Help.

I have a huge problem and I would really love some help resolving this issue.

I know that a P0700 code is thrown anytime there is an issue with the Automatic Transmission, its like a generic code that following a second more problem specific code.
At least that was I was able to deduce after sitting and Googeling for a few hours. I maybe wrong, if I am please tell me.

So this problem specific code p1706, is eluding me, I cant find anything specific on it. Other than "Automatic Transaxel Issue"

Somebody please help me figure this out, I will get you back in anyway that I can.

I dont want to have to replace her transmission, its shifts very smooth, and I have a hard time believing that its the transmission its self that is bad. If I am wrong here, and its only a matter of time before the transmission goes, please let me know.
Old 06-09-2008, 10:41 PM
  #2  
Honda-Tech Member
Thread Starter
 
theprofiteer's Avatar
 
Join Date: Jul 2007
Location: Lawrenceville, GA, USA
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1998 Honda Civic Auto, CEL Codes, P0700, and P1706, Please Help. (theprofiteer)

Ok so I looked around a little and found this.

P1706 Open in Transmission Range Switch Circuit

what does this mean?


I found this, but I am not sure what to make of it.
http://www.crvownersclub.com/TSBs/2005/05-058.pdf


Modified by theprofiteer at 1:55 AM 6/10/2008
Old 06-09-2008, 10:46 PM
  #3  
Honda-Tech Member
 
-JSpecEk*9-'s Avatar
 
Join Date: May 2005
Location: Nor.Cal
Posts: 3,107
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1998 Honda Civic Auto, CEL Codes, P0700, and P1706, Please Help. (theprofiteer)

check the wires on the trans to start off.
Old 06-10-2008, 02:19 AM
  #4  
Honda-Tech Member
Thread Starter
 
theprofiteer's Avatar
 
Join Date: Jul 2007
Location: Lawrenceville, GA, USA
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1998 Honda Civic Auto, CEL Codes, P0700, and P1706, Please Help. (-JSpecEk*9-)

bump
Old 06-10-2008, 11:35 AM
  #5  
Honda-Tech Member
Thread Starter
 
theprofiteer's Avatar
 
Join Date: Jul 2007
Location: Lawrenceville, GA, USA
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1998 Honda Civic Auto, CEL Codes, P0700, and P1706, Please Help. (theprofiteer)

some body please help me.
Old 06-10-2008, 05:54 PM
  #6  
Honda-Tech Member
Thread Starter
 
theprofiteer's Avatar
 
Join Date: Jul 2007
Location: Lawrenceville, GA, USA
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1998 Honda Civic Auto, CEL Codes, P0700, and P1706, Please Help. (theprofiteer)

So information for me at all?

anything anyone?
Old 06-10-2008, 05:57 PM
  #7  
Honda-Tech Member
 
-JSpecEk*9-'s Avatar
 
Join Date: May 2005
Location: Nor.Cal
Posts: 3,107
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1998 Honda Civic Auto, CEL Codes, P0700, and P1706, Please Help. (-JSpecEk*9-)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -JSpecEk*9- &raquo;</TD></TR><TR><TD CLASS="quote">check the wires on the trans to start off.</TD></TR></TABLE>
Old 06-10-2008, 10:03 PM
  #8  
Honda-Tech Member
Thread Starter
 
theprofiteer's Avatar
 
Join Date: Jul 2007
Location: Lawrenceville, GA, USA
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1998 Honda Civic Auto, CEL Codes, P0700, and P1706, Please Help. (-JSpecEk*9-)

dude I did, I did that before I even posted.

I really want to know what that code means.
Old 06-10-2008, 10:18 PM
  #9  
Junior Member
 
civicdriverzero1's Avatar
 
Join Date: Dec 2006
Location: Lynden, WA, USA
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
Default

In the auto transmission a transaxle is a huge deal. If you are shifting smooth then I can wager the only reason the CEL light is on is because you need to change the transaxle fluid and filter - I think they do that in shops when you ask for a transmission flush but you may need to be specific. If your transaxle was on its way out your car wouldn't be doing well at all. Look into it.
Old 06-10-2008, 10:20 PM
  #10  
Junior Member
 
civicdriverzero1's Avatar
 
Join Date: Dec 2006
Location: Lynden, WA, USA
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
Default

This is what transaxle means

Transaxle
From Wikipedia, the free encyclopedia
Jump to: navigation, search
A transaxle, in the automotive field, is a component that combines the functionality of the transmission, the differential and the drive axle into one integrated assembly. Transaxles are near universal in all automobile configurations that have the engine placed at the same end of the car as the driven wheels: the front wheel drive, rear-engined and mid-engined arrangements.

Old 06-10-2008, 11:30 PM
  #11  
Honda-Tech Member
Thread Starter
 
theprofiteer's Avatar
 
Join Date: Jul 2007
Location: Lawrenceville, GA, USA
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (civicdriverzero1)

Thanks for your input man, but I already had a full flush and filter change no less than a month ago, this really doesn't help me out.

I am just trying to figure out what the code p1706 means, and what the application for repair would be.
Old 06-11-2008, 12:30 PM
  #12  
Honda-Tech Member
Thread Starter
 
theprofiteer's Avatar
 
Join Date: Jul 2007
Location: Lawrenceville, GA, USA
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (theprofiteer)

bump
Old 06-12-2008, 01:12 PM
  #13  
Honda-Tech Member
Thread Starter
 
theprofiteer's Avatar
 
Join Date: Jul 2007
Location: Lawrenceville, GA, USA
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (theprofiteer)

HEEEEEEEEEEEEEEEEEEEEEEEELP!!
Old 06-16-2008, 11:54 PM
  #14  
Honda-Tech Member
Thread Starter
 
theprofiteer's Avatar
 
Join Date: Jul 2007
Location: Lawrenceville, GA, USA
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (theprofiteer)

bump
Old 01-25-2012, 12:29 PM
  #15  
Trial User
 
jpauche's Avatar
 
Join Date: Oct 2011
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1998 Honda Civic Auto, CEL Codes, P0700, and P1706, Please Help.

Were you able to figure out the P1706 code? my 1999 Integra got the same code and not sure what that means.
Thanks!
Old 01-25-2012, 05:18 PM
  #16  
Honda-Tech Member
 
k94cvtec's Avatar
 
Join Date: Mar 2009
Location: Lynden wa
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1998 Honda Civic Auto, CEL Codes, P0700, and P1706, Please Help.

http://www.justanswer.com/uploads/ac...4_SHOT0130.jpg
Old 02-28-2017, 12:55 PM
  #17  
Honda-Tech Member
 
pdotjones's Avatar
 
Join Date: Sep 2004
Location: 626, ca, usa
Posts: 1,174
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1998 Honda Civic Auto, CEL Codes, P0700, and P1706, Please Help.

Back from the dead with a possible solution for those that have this issue. Not saying that what i did is a for sure fix, but it has worked for me, and i don't have CEL anymore. My obd2 scanner would give me code p1706 and i needed to clear it so i can get the car smogged. I just bought the car with a busted auto trans, and replaced it to turn around and dd/sell. Anyway, this is what i did. Take your center console apart and remove the shifter plate. It is held by two screws. Under that you will see a white plug/box held on by two 10mm nuts. Loosen and push it forward and retighten. Hopefully this works for you as it did for me.
Old 01-10-2019, 09:35 AM
  #18  
Honda-Tech Member
 
Mattbmenifee's Avatar
 
Join Date: Oct 2018
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1998 Honda Civic Auto, CEL Codes, P0700, and P1706, Please Help. (-JSpecEk*9-)

Originally Posted by theprofiteer
dude I did, I did that before I even posted.

I really want to know what that code means.
that code is exactly what it says it is. The range switch under the gear shifter indicator panel. Basically that switch indicates what gear your in by the shifter itself and on the dash. Water spilt from a cup in holder down under shift panel and my ECM threw both P0700 and p1706 causing my TCM to signal the ECM and my ride went in to limp mode. I let the switch dry out , reset my ECM and limp mode went away and all is good again. Start with that switch. Hopefully this helps you.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
misledyouth
Honda Civic / Del Sol (1992 - 2000)
6
10-11-2009 08:32 PM
lrcrx90
Honda Accord (1990 - 2002)
1
08-19-2009 04:56 AM
whereiscarmensandiego
Honda Civic / Del Sol (1992 - 2000)
15
10-23-2008 11:16 PM
Mysterio
Honda Civic / Del Sol (1992 - 2000)
2
09-03-2006 07:35 AM


Thread Tools
Search this Thread
Quick Reply: 1998 Honda Civic Auto, CEL Codes, P0700, and P1706, Please Help.



All times are GMT -8. The time now is 09:44 PM.