Randolph

Hey. I am a bit new with this stuff but for the most part I AM learning. I am converting from a D16Y7 AUTO setup to a D16Z6 MANUAL setup.

I ran into a issue with this mount. How do I go about bolting it up to the frame or what would I need to do/buy? Thanks.

Note: I attached a picture of the red 94 cx hatch bay and the blue is 96 lx civic bay which is mine for comparison.

Former User

Creating the most informative thread title helps you get replies - edited

HondaPartsHero

https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/how-my-auto-manual-swap-pics-56k-no-no-2090074/

http://www.innovativemounts.com/Prod...ductCode=49520

cheggie

You need the bracket and mount for a stick shifted 96 - the 94 uses a different arrangement.

http://www.hondaautomotiveparts.com/...T+ENGINE+MOUNT

#2 and #6 in this image, plus the associated hardware.

I don't think you can use your mount at all - you need the 96-2000 ones.

94EG8

That works for a '92 - '95 Civic/'94 - '01 Integra, but it wont work here.

Correct. You can reuse the automatic rubber mount (number 2 in the diagram, although it isn't as strong as the manual version) you will need number 6 though (I have a couple of these for sale in the my F/S thread, link in sig if you're interested)

Btw, the clutch line for a '96 - '00 is different than the '92 - '95 as well, it uses a shorter hardline and a longer rubber flex hose.

Randolph

Thanks guys. Good site.