96-98 civic auto to manual wiring - reverse lights
#1
Honda-Tech Member
Thread Starter
96-98 civic auto to manual wiring - reverse lights
this is what you need to do if you are using an auto wiring harness for a manual engine swap.
if you use the auto harness you won't have the reverse lights work since the auto uses the auto control module to switch on the reverse lights.
you need to connect the 2 pin revers light sensor plug to these 2 wires on the Dash harness. as far as i can tell i doesn't matters which wire goes where.
here are the wire you need to connect to
a closer picture of the 2 wires
if you use the auto harness you won't have the reverse lights work since the auto uses the auto control module to switch on the reverse lights.
you need to connect the 2 pin revers light sensor plug to these 2 wires on the Dash harness. as far as i can tell i doesn't matters which wire goes where.
here are the wire you need to connect to
a closer picture of the 2 wires
Thread
Thread Starter
Forum
Replies
Last Post
redline75
Honda Civic / Del Sol (1992 - 2000)
10
09-27-2006 10:03 AM
confidence
Honda Civic / Del Sol (1992 - 2000)
1
09-23-2003 09:04 PM