mekanic

This is my first post and the first Honda I've worked on, so bear with me. I bought a 95 Del Sol with 355k miles on it. It sounds as if I'm pulling a trailer with all the rattles it has. I was going to replace the outer tie rods and noticed the is the inner tie rod dust boots on both sides of the car have separated from the clamp on the small end. I called the local parts store about getting a new dust boot and they don't sell just the boot. The rest of the suspension is probably stock since the ball joint boots are compromised and dry. Any suggestions what to do first? Do I need a hydraulic press to do any of this work? I have a few suspension pullers/spreaders.

Cjlarson14

Step 1: Get a Haynes or Chilton's Manual for your vehicle.
Step 2: Attempt to fix what you are fixing slowly and accurately.
Step 3: Come back to HT and ask questions regarding any issues or problems you run into.


PS. Researching would do you better than randomly posting a "What should I do first." It's a vehicle. Start wherever you like and go from there.