93 civic hb cx - Orientation of wheel bearing does it matter?
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: Los angeles, Ca, USA
Posts: 1,160
Likes: 0
Received 0 Likes
on
0 Posts
93 civic hb cx - Orientation of wheel bearing does it matter?
I Bought a new OEM NTN Honda wheel bearing and in the process of pressing the bearing into the front knuckle of a 93 civic hb cx. The wheel bearing that I removed from the knuckle looks identical in nature on both sides of the bearing.
The new wheel bearing I received has black plastic on one side of the bearing between the races, and the other side is majority all metal. Which side of the bearing should be facing which direction? Does it matter? Any input would be appreciated.
The new wheel bearing I received has black plastic on one side of the bearing between the races, and the other side is majority all metal. Which side of the bearing should be facing which direction? Does it matter? Any input would be appreciated.
#5
B*a*n*n*e*d
Join Date: Dec 2011
Location: Off da Golden Coast!! YAAARGH!!
Posts: 402
Likes: 0
Received 0 Likes
on
0 Posts
Re: Orientation of wheel bearing does it matter?
No, orientation does not matter. They are not unidirectional bearings. They should only fit one way as well, so that makes it easy to figure out
#6
GDD Member
iTrader: (1)
Re: Orientation of wheel bearing does it matter?
The problem with that statement is that they can go on either way.Everything else is correct, it doesn't matter which side goes where.
Usually the only ones that matter are the type that come on Acura TLs which have a little magnet attached to them when you buy it. The magnet is there to indicate which side of the bearing has the trigger wheel for the ABS sensor.
Trending Topics
#8
Seagull Management
Join Date: Jun 2008
Location: Miramichi, NB, Canada
Posts: 15,150
Likes: 0
Received 24 Likes
on
22 Posts
Re: 93 civic hb cx - Orientation of wheel bearing does it matter?
Metal side goes out. It really doesn't make a whole lot of difference, but the metal dust shield is more resistant to the elements.
#9
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: Los angeles, Ca, USA
Posts: 1,160
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93 civic hb cx - Orientation of wheel bearing does it matter?
So you would face the metal side towards the lugnuts?
Last edited by JohnnyEF; 04-09-2014 at 05:13 PM. Reason: .
#11
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: Los angeles, Ca, USA
Posts: 1,160
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
JohnnyEF
Honda Civic / Del Sol (1992 - 2000)
3
04-09-2014 10:16 AM