92egminihatch's build thread (no 56k)
#1
Junior Member
Thread Starter
Join Date: May 2009
Location: sioux falls, SD
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
92egminihatch's build thread (no 56k)
Exterior
Car has a cinnamin orange red kind of paint job, brand new never been driven on the street with this paint. passenger side mirror is shaved off clean and the gas door has been shaved as well. the front lower radiator support is tubed out for an intercooler. it does not have a hood right now but i think i want to go with a carbon fiber evo style hood. it'll definately be carbon fiber though cuz i think it'll look great with this paintjob/window tint and some nice fat bronze or black 16's. havent decided on the wheels yet for sure either. mainly focused on getting the car driveable first
Driver side
Rear Passenger Side
Front Passenger Side
From the Front(engine Bay)
Motor transmission and fuel lines
Like the title says i have a 92 EG hatch shell that i just bought and i have a d15b2 motor with a z6 head on it im getting ready to put in. i just bought an s20 hydraulic tranny from junkyard that i put on the motor last night, i replaced the flywheel with a new stock one and replaced the clutch and bearing with a stock one also. the back end is all cut out for a fuel cell, i ordered a fuel cell today and hopefully will have it by next weekend to put in the car. looking more into that today i found some fuel lines(what i think are fuel lines) that are already ran and just need to be hooked up. also i found two holes drilled down through the body and a power and ground wire ran under the car right in the way of a blue hose (which i believe to is the fuel line)
Here is the mini me with the tranny and new clutch/flywheel installed
from inside looking at the back hatch. this is where the cutout is for the fuel lines, you can kinda see a blue hose inside there. not sure its the return or the feed line for fuel
this im not sure if its the fuel return or the ful run line
Suspension
seems to be stock in the back but i think the front might have tein springs, where the black grime is worn off you can see some green showing through. but since theres no motor in the car you cant tell if its lowered or not. i'll keep updating as i decide what to do with suspension and wheels cuz im not sure yet.
turbo will be soon to come
Car has a cinnamin orange red kind of paint job, brand new never been driven on the street with this paint. passenger side mirror is shaved off clean and the gas door has been shaved as well. the front lower radiator support is tubed out for an intercooler. it does not have a hood right now but i think i want to go with a carbon fiber evo style hood. it'll definately be carbon fiber though cuz i think it'll look great with this paintjob/window tint and some nice fat bronze or black 16's. havent decided on the wheels yet for sure either. mainly focused on getting the car driveable first
Driver side
Rear Passenger Side
Front Passenger Side
From the Front(engine Bay)
Motor transmission and fuel lines
Like the title says i have a 92 EG hatch shell that i just bought and i have a d15b2 motor with a z6 head on it im getting ready to put in. i just bought an s20 hydraulic tranny from junkyard that i put on the motor last night, i replaced the flywheel with a new stock one and replaced the clutch and bearing with a stock one also. the back end is all cut out for a fuel cell, i ordered a fuel cell today and hopefully will have it by next weekend to put in the car. looking more into that today i found some fuel lines(what i think are fuel lines) that are already ran and just need to be hooked up. also i found two holes drilled down through the body and a power and ground wire ran under the car right in the way of a blue hose (which i believe to is the fuel line)
Here is the mini me with the tranny and new clutch/flywheel installed
from inside looking at the back hatch. this is where the cutout is for the fuel lines, you can kinda see a blue hose inside there. not sure its the return or the feed line for fuel
this im not sure if its the fuel return or the ful run line
Suspension
seems to be stock in the back but i think the front might have tein springs, where the black grime is worn off you can see some green showing through. but since theres no motor in the car you cant tell if its lowered or not. i'll keep updating as i decide what to do with suspension and wheels cuz im not sure yet.
turbo will be soon to come
Last edited by 92EGminihatch; 05-22-2009 at 06:19 PM. Reason: pics work this time?
#5
Junior Member
Thread Starter
Join Date: May 2009
Location: sioux falls, SD
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92egminihatch's build thread (no 56k)
i'm not sure where our digital camera is. i used my cell phone for these pictures.
Thread
Thread Starter
Forum
Replies
Last Post
Clear coat fading carbon fiber hood to get that clean carbon fiber look back or paint it to match th
South Bay Surfer
Honda / Acura
32
06-16-2004 04:22 AM
South Bay Surfer
Honda / Acura
8
01-31-2004 10:27 PM