92 civic power steering help
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2011
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
92 civic power steering help
so... i wanna put my LS engine from one civic to another and this civic has power steering. I would love to keep it because its my daily. so my reason for this posting is can i use the single cam power steering pump and bracket on the LS motor or do i have to get the LS bracket for the pump or just use a Integra power steering pump and bracket.. Also does anyone know if the power steering tubes are the same. like where it connects from the rack to the pump?
thanks all help is needed
thanks all help is needed
#2
Honda-Tech Member
Join Date: Dec 2011
Location: ILLINOIS
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92 civic power steering help
I did a B16 Swap into 95 Civic Si. I ended up using the power steering pump and bracket that came with the B series engine. The only thing I ran into was when I hooked up the line that goes from the power steering reservoir to the power steering pump I had to use a light coat of HondaBond.
Reason for this was that the power steering line had the flange that was held in by 1 bolt. The b-series power steering pump was set up for 2 bolts. When I first initially installed everything I had a small leak. More like a tiny drip. After Hondabond was added, I have been good to go no issues or leaks or drips. Works like a champ.
Just my 2 cents. Hope that info helps you out.
Reason for this was that the power steering line had the flange that was held in by 1 bolt. The b-series power steering pump was set up for 2 bolts. When I first initially installed everything I had a small leak. More like a tiny drip. After Hondabond was added, I have been good to go no issues or leaks or drips. Works like a champ.
Just my 2 cents. Hope that info helps you out.
Thread
Thread Starter
Forum
Replies
Last Post
not7fifteen
Honda Civic / Del Sol (1992 - 2000)
2
04-30-2002 10:26 AM