shabbir.1

Hi All!

I am building my ride and need your help in fixing out the following problem.

The carpet inside the trunk is divided into different pieces. I had have most of these pieces already only the part that is fixed towards the trunk lights was missing. So I bought one recently for my car. Following is the picture of this piece.



(please note the self locking tabs on the back side of the plastic trim panel)

This is the data stamp on the plastic trim panel







In the trunk






Problem: In the last few pictures you can see the bare trunk (without overlaid) has no holes for the tabs to get fixed-in.
The carpet piece along with the plastic panel belong to the EG civic as it can be confirmed from the date stamp shown above. Can some please help me how to fix this carpet piece along with this plastic panel in to the trunk.

Regards
Shabbir

slowDB7

i have never seen those for the sedans, my sedan and coupe didnt come with one.... are you sure its not from hatchback model?

deschlong

iTrader: (8)

Whoa. Yes, very strange. I wonder if the part number changed? Or, it won't be from a hatchback model, but it might be from a Coupe? Does the part have a number on it? Sometimes they are stamped with the part number.

shabbir.1

I can't really confirm it but i m sure it is not from the hatchback model at least.
In hatchback model the rear glass opens separately and the rear trunk which has got the latch at the top (not in its base) opens downward (in sedan the trunk open upwards). However it can be (still not sure) from the coupe. But I wonder coupes don't come in parts in this part of the world.

I have taken some more pics of this carpet piece while placing it in the trunk, just have a look at it, how perfectly it aligns with the curvature of the trunk and the holes there for the rear lights and also check the position of the striker in between, so it seems to be from the sedan. Remember one thing this is parted form a JDM ferio civic (sedan or coupe).






Regards
Shabbir

shabbir.1

There is no part number on it. Today I will talk to my upholsterer if he can fix it somehow. Otherwise, I will break all the tabs underneath the plastic trim panel and will fix it by adhesive. Because I consider it an important part as it will serve to protect the trunk from damage while taking in and out heavy goods.

Regards

shabbir.1

Here I got the reference pictures of the EG sedan...






In the last picture you can see the plastic trim panel, now tell me how to fix it with those 4 nos. locking tabs admitting the fact that there are no holes provided in the trunk.

Regards

belairbrian

I'll just throw this out there as a possibility. The car was wrecked in the rear at some point and after market parts ( missing the holes) were installed.

slowDB7

i was walking thru my local pick a parts yard today, and looked in the trunk of a 95 sedan and there it was...ive never seen it befor haha but it was there, maybe it was a special option

deschlong

iTrader: (8)

Well, I finally figured this out. It's been bugging me since I saw this thread. But, not being a Sedan expert, I never clued in.

However, I became an owner of a CDM EH9 recently, and while it had the fabric part that fits against the back side of the trunk, it was missing the plastic section. Lucked in to an EH9 donor car (rare as rockinghorse poo here) so picked up this piece ... lo and behold, on the EH9 there are holes in the lip along the metal where the trunk latches, to fit the mounting tabs. It was an EH9(and presumably EG9)-only feature. If you want to retrofit it properly into another 5G Sedan, you are going to have to drill holes.