4thgenx42

What are the specific parts that i would need to do a 5 lug conversion? Im planning on doing this to my EM1.

delslo93

You will need the 5 lug rotors and calipers, ITR master cylinder, 4040 prop valve off of like a 92 integra NON-ABS, and ebrake cables.

4thgenx42

What about hubs, control arms, spindles etc...? Im looking to get everything new...

BlueIntegraBoy

iTrader: (5)

Everything new onto your existing knuckle and spindle?

Wheel bearings, hubs, rotors, calipers, brake lines, pads, 98+ Integra 1" master cylinder

Aquafina

iTrader: (3)

You don't need the prop valve. See my bio for a link to my 96 DX 5-lug thread. There is a pic in it of parts on a pallet. You'll need most of those parts minus the trailing arms (don't quote me on that though).

bmoua

why does this guy need a MC or a prop vavle? his Em1 has them already. You'll need wheel bearings, hubs, rotors, calipers, brake lines. Your axles should bolt right up...well thats only if you use the usdm 5 lug setup.

Aquafina

iTrader: (3)

His axles will work if he uses CTR 5-lug as well. I'm using D series axles with my CTR brakes.

BlueIntegraBoy

iTrader: (5)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bmoua &raquo;</TD></TR><TR><TD CLASS="quote">why does this guy need a MC or a prop vavle? his Em1 has them already. You'll need wheel bearings, hubs, rotors, calipers, brake lines. Your axles should bolt right up...well thats only if you use the usdm 5 lug setup. </TD></TR></TABLE>

Because 1" &gt; 7/8"

MiamiEJ1

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueIntegraBoy &raquo;</TD></TR><TR><TD CLASS="quote">

Because 1" &gt; 7/8"</TD></TR></TABLE>
Dont know about the prop valve, if the EM1 brings a 40/40 but he does need to upgrade his MC. Not necessary if you're broke, car is driveable but wouldn't recommend it.

4thgenx42

Ok all of these parts are from a usdm integra R correct? Im going to buy all the parts from the dealer. So im going to be calling in with a USDM VIN number. I already have the wheels...

Natural Aspirations

You can buy the Brakes, Rotors and have he 5 lug spindles pressed into the em1 hub