I might not be totally correct, but if the USDM DC2 ITR is the same as the `98 v6 accord, then I would assume you could bolt the accord 4x114 brake setup on the ek.
If you have a choice, I would stay away from the `96 JDM DC2R brakes. I have them on mine and I want to get rid of them. It's basically the same brakes as the GSR, but with a different lug pattern. I have only found one place in the US that sells aftermarket brakes for this useless setup. Everybody has rotors for accords and preludes but not the `96 JDM DC2 ITR spec brakes.
Only reason I have the brakes is because I bought a EK SiR without any brakes on it at all and I needed something to slap on while I'm building the chassis.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.