Uzumymw

Hello, I'm during installation DRL Canada system into my 2000 Civic LS.

I used the manual:




but I can't find where I should connect the wires BLK/WHT (no. 20) and YEL/BLK (no 18) to the fuse.

I found only one connector C419 for YEL/BLK wire but I'm not sure whether it's fine connector?





And what about BLK/WHT cable?

tony_2018

There's more than one connector to the fusebox, have you check those?

Uzumymw

I know there're many of connectors. I'm looking for a suitable for connect these 2 wires, but manual can't help me :/

tony_2018

In order to make it look like factory you need it to be pinned into the correct plug in order for you to put a 10a fuse in slot 20. Thats why you need to look at all of the plugs in order to locate the correct one.

Uzumymw

I thought that I wouldn't have to do this. Maybe someone install DRL and is able to help me?

Former User

The two wires pin to connectors C419 (pin 9) and C420 (pin 16).

Uzumymw

Wow, I don't know why I didn't found this :O

THANKS!

tony_2018

Download the FSM.

Former User

I think he has the manual but hasn't yet figured out where everything is.

Uzumymw

tony_2018

he was able to locate the diagram for the DRL and one of the connectors behind the fusebox. They are there, I'm trying to not deter you from continuing your search because that info is in the FSM.

Uzumymw

I was searching in connectors in my manual but only I found an YEL/BLK wire (I was not sure correctness), my oversight.