Logan L.

Hi. I have a 1994 Honda Civic Cx with roth around each wheel well and the back corner, under the taillight which is under the bumper, connected to the bottom of the quarter panel. I was wondering where I could get those back corners, because they are rotted and I can't find them anywhere. Any suggestions? Thanks. This isnt my Honda but it was a picture from the internet.

eghatch9295

iTrader: (1)

we call them junkyards

TomCat39

Do a Google search for 92-95 hatchback rear fender panels. There is quite a few replacements out there. It's not straight bolt on, requires welding, cutting and body work.

e0325

http://www.rustrepair.com/PANELS/CIV...K-2129251R.HTM

Logan L.

Well I bought a elongated quarter because it's rotted more than the small quarter covers, and that larger one didn't come with the back corner that the short one does, like shown in the link by e0325.

andoxviii

iTrader: (1)

Highly unlikely he'll find one in any better condition at a junkyard than what he already has.

So? If I'm understanding this correctly, isn't that behind the bumper anyways? Just fix it yourself instead of replacing it. It wouldn't need to look perfect if it's covered up anyways.

eghatch9295

iTrader: (1)

rot around the taillight isnt very common. i live in the rust belt, i know this. see plenty of rocker/quarter.

Logan L.

I will probably just weld in a couple plate over which is good enough, and I know, I live in New England its horrible.