ok. so i had a 92 civic CX and i am swapping in a mini-me (b7 block z6 head) and is being run by a p28.
sooo. i was curious about the o2 sensor. i have found ways to do this by running wires to the ecu directly, but all the article that i have found to do this utilize the stock d15b7/8 wire harness. i am using a d16z6 wiring harness so it already has the 4 wire o2 sensor plug on it. is it just plug and play the or do i still need to run wires? yes i have tried searching to no avail. thanks for any help.
Because your civic is a '92 its 100% plug and play with the EX/Si engine harness. '92 only civics had vtec prewired to the shock tower plugs, as well as the additional wiring for a 4 wire O2 sensor on CX models.
"Bacon tendercrisp chicken, the most powerful sandwich in its class."
Per ardua ad astra
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.