00 civic si b16a - wont rev past 3k RPM until warm
#1
00 civic si b16a - wont rev past 3k RPM until warm
I have a 00 civic si with a b16a.
My mods are skunk 2 1st gen intake manifold, chipped ecu and intake.
Im having problem with my motor everytime after i turned the motor down and crank it up again. Everytime when i crank it up again after shutting it down, when i rev my motor and it wont pass 3k RPM. It will always go down. For myself to avoid this, i have to wait awhile for it to pass 3k RPM normally.
When it doesn't settle down and i drive, it will lag. For example, when im accelerating, its fine but when i slowly let down gas, it will bogged,lagged, or lets says motor will jump.
note: it already happened before when i put a new ecu. Maybe tomorrow ill switch back to stock and see any changes.
My mods are skunk 2 1st gen intake manifold, chipped ecu and intake.
Im having problem with my motor everytime after i turned the motor down and crank it up again. Everytime when i crank it up again after shutting it down, when i rev my motor and it wont pass 3k RPM. It will always go down. For myself to avoid this, i have to wait awhile for it to pass 3k RPM normally.
When it doesn't settle down and i drive, it will lag. For example, when im accelerating, its fine but when i slowly let down gas, it will bogged,lagged, or lets says motor will jump.
note: it already happened before when i put a new ecu. Maybe tomorrow ill switch back to stock and see any changes.
#3
Loves Tossing Salad
Join Date: Mar 2014
Location: They all look like little ants
Posts: 1,067
Likes: 0
Received 14 Likes
on
10 Posts
Re: 00 civic si b16a - wont rev past 3k RPM until warm
Yea, do what you said in your note. Switch it with the original ecu and see what changes. I bet the lurching will go away and the lag. What ecu/map are you running?
#4
Honda-Tech Member
Re: 00 civic si b16a - wont rev past 3k RPM until warm
You can't expect a Ecu for a single cam to work on your dohc, is the chip for a obd2 b16? Throwing cels? Switch it for the stock b16 one. Those aren't even enough mods to even get a noticeable gain with a chip lol.
#5
Re: 00 civic si b16a - wont rev past 3k RPM until warm
I took it to the shop and they said its Bc of the Ecu. Bad chipping I guess. They said one part of the chip is chipped and can't be removed.
So I put back on the stock and it's OK now. But time to time it still does it a little.
So I put back on the stock and it's OK now. But time to time it still does it a little.
#6
Re: 00 civic si b16a - wont rev past 3k RPM until warm
http://youtu.be/dhlJQ3_1EB8
OK I switched to stock Ecu but it's still same. I posted a video on YouTube. Please check out out.
OK I switched to stock Ecu but it's still same. I posted a video on YouTube. Please check out out.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Johnathan Doe
Honda Civic / Del Sol (1992 - 2000)
0
02-26-2018 10:42 AM