425_Booster

I took my door apart today to replace my side mirror due to a guy very nearly going head on with me, but swiping my mirror. Anyways. Before I put my door skin back on I made sure the window wasn't catching any of the wires. I was rolling up my window in the non-auto (holding the switch up) setting and it would go up and hold. When I rolled it up in the auto setting it goes up then immediately comes back down 3''-4''. Im not sure what the problem is because I didn't touch any of the cables, and it stays up when you don't ''auto roll'' it up.

Could it have possibly changed some setting that I need to reset because I had to disconnect the window wiring? Do I need to turn my key or press my window buttons in some weird order? I don't know about cars sometimes these days. I'm not even sure if disconnecting and reconnecting the battery for some reason would help.

425_Booster

Any ideas?

TypeRfit

iTrader: (6)

Most likely it is your switch. Once it gets into the "auto" up and down that portion of the switch might be damaged. I would just try to find or borrow a switch assembly to see if thats the issue

av911

You have to reset the auto UP/DOWN procedure. Check your manual.

VroombabyVroom

Aye, checking the manual first is always a good idea.

425_Booster

Yes I know, and I did. I just checked it again too. There's nothing in there about reseting it.

av911

Look closer..........