honda civic 2008 car vibrate at stops and CEL P0497
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2011
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
honda civic 2008 car vibrate at stops and CEL P0497
Hey guys.. I have a little bad idle with my civic.. I felt it vibrates when it is on stops.. I felt vibration on the steering wheel And the idle is around 600 rpm.. My car is stock. No modes on it, changed air filter, and sparks plugs with a new ones. It has a Cel P0497... I also change the gas cap. Any idea of where I can star, can that CEL be the culprit of vibrate problems?
#3
Honda-Tech Member
Re: honda civic 2008 car vibrate at stops and CEL P0497
You need to take a vacuum gauge to the EVAP purge valve first. If it holds vacuum then one of the other valves is bad or there is a bad wire/connection. If it doesn't hold vacuum then the purge valve is bad.
#4
Honda-Tech Member
Thread Starter
Join Date: Dec 2011
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Is the Evap purge valve on the throttle?
Whe u said the other valve were are those?
#5
Honda-Tech Member
#6
Honda-Tech Member
Thread Starter
Join Date: Dec 2011
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Re: honda civic 2008 car vibrate at stops and CEL P0497
thx for the replay.. yesterday i was using Torque with an obd2 bluetooth scanner and i noticed that Evap Vapour pressure was giving negative numbers
moving around 13.2, -13.2, -26.3, -55.6 and even -110.. almost all the time stay in -13.2 or 13.2 are these value correct? or my pressure sensor is bad?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post