2013 Civic Si Intake Install
#1
2013 Civic Si Intake Install
I installed my DC Sports intake last night on my '13 Si. The hose that comes off the crank case and into the intake did not have any clamps for it, and the directions do not mention putting clamps on either end of that hose. I have seen other installs where they have clamps. Is this normal to not have clamps on this hose?
Here is the intake as it is now:
Here is the intake as it is now:
#2
Honda-Tech Member
Join Date: Oct 2005
Location: Crook County
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2013 Civic Si Intake Install
Short term, you'll be OK. Just get some hose clamps as soon as you can to be safe.
Also, you might want to trim down that breather hose about an inch. It looks pinched.
Also, you might want to trim down that breather hose about an inch. It looks pinched.
#3
Re: 2013 Civic Si Intake Install
What size clamps do I need for the breather hose?
What is happening if it is in fact pinched?
Anything else look off about my install?
What is happening if it is in fact pinched?
Anything else look off about my install?
#4
Honda-Tech Member
Re: 2013 Civic Si Intake Install
Otherwise looks like every other pipe-and-filter SRI available.
#5
#6
Honda-Tech Member
Join Date: Jan 2004
Location: Brandon, Manitoba, Canada
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2013 Civic Si Intake Install
You end up getting air infused oil trapped in your valve cover that will eventually clog the line. It is supposed to allow excess crank case vapours out and into the intake air stream to get burned off in the chambers.
Let this pinch stand for too long and you could low seals R create leaks.
Let this pinch stand for too long and you could low seals R create leaks.
Trending Topics
#9
Re: 2013 Civic Si Intake Install
#10
Honda-Tech Member
Join Date: Jan 2004
Location: Brandon, Manitoba, Canada
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2013 Civic Si Intake Install
The Majestic Honda site says 12.5mm or half inch. Grab the Autocraft one you mentioned, one for each end.
Can't go wrong with those.
Can't go wrong with those.
#11
Re: 2013 Civic Si Intake Install
That seemed to work. That hose isn't going anywhere.
Average gas mileage has already dropped .1 mpg since Thursday. That's a little concerning to me
Average gas mileage has already dropped .1 mpg since Thursday. That's a little concerning to me
#13
#14
Honda-Tech Member
Thread
Thread Starter
Forum
Replies
Last Post