portaman03

Okay, so I am finally getting around to mounting the wheels I've had for a few months. I've been doing some research on hub-centric rings, but I can't seem to settle on which measurements are needed (pics).

Anybody know what 'outer diameter' measurement for hub-centric ring is needed to bolt onto EM2 hub? Which measurement is needed for the 'interior diameter' of the hub-centric ring?

There are two diameters...

portaman03

bump

Also posted in wheel/tire forum.

portaman03

bumping... again.

NOBODY has aftermarket wheels with hub centric rings???

Another user said most universal wheels have a 73 mm center bore, the em2 should be 56.1 mm.

What do you guys think? I want these wheels on yesterday! Lol.

http://cgi.ebay.com/ebaymotors...QrdZ1

dr_spock

The inner diameter for the hubcentric ring should be 56.1mm for your honda hubs. The outer diameter will depend on your rims. Measure the diameter in your picture #2 with a caliper. Or check the manufacturer website of your rims and they might have specs sheets.

You might want to also check that you have the correct shaped lug nuts for your new rims.