jalow69

Basically i have a very loud exhaust thatz driving me nutz...got pulled over 3 times already...n im lookin to lower the sound w/ out switching to stock or gettin another aftermarket muffler that will also sound loud

so which will be better to lower the sound a resonator or a silencer...n wtf is the difference....feel free to comment

thkx

fventura03

iTrader: (1)

not all aftermarket exhausts sound loud, you probably got a cheap ebay/pepboys/etc one.

toyomatt84

iTrader: (1)

A silencer is a flange that mounts to the tip/end of your exhaust. In my opinion, I think they look like crap, and totally take away from the aesthetics of an aftermarket exhaust.

A resonator would be an expansion/contraction pipe that mounts before your muffler. That might reduce the audio output of your exhaust enough to make it withstandable. It takes more work, but I think it's the better choice.

Rich EX

silencer is cheap, some are made for certain brands of mufflers so they look good and keep the tuned sound, resonator is more expensive, has to be welded in, but sound is gonna be quiter and sound alot better. resonator is your best bet.

MajinB

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fventura03 &raquo;</TD></TR><TR><TD CLASS="quote">not all aftermarket exhausts sound loud, you probably got a cheap ebay/pepboys/etc one.</TD></TR></TABLE>
don't assume that. eh, my catback came with a silencer, it was the first thing i took out. it worked prefectly though, instead of FREAKIN loud it was just noticable. you should already have a resonator on any exhaust. it should be the resonator, then the canister which makes all the noise. just get a silencer. is it a full catback?

teknoracing

Not all exhaust systems come with resonators, this keeps costs down. Get a resonator and be done with it.


Silencers are cheap and look ugly.

Moogen Powah

A resonator will lower and smoothen your exhaust tone without restricting your exhaust to the extent that a silencer does. Yes, it does require welding, but IMO, it is the better route than going with a silencer.