chinesebwoy

I'm new to this forum and was wondering if anybody can tell me how to change the alternator belt. thanks

daddy

iTrader: (1)

The best way is to read the instructions in a chiltons or haynes manual.

But basically you take your drivers side front tire off to access where the belt goes around the crank pully
loosen the alternator to relieve tension on the belt.
pull the old belt off
put the new one on
adjust to the proper tension which i believe is around 0.4" deflection
put tire back on.

done.

Boilermaker1

missed a step in there...
Remove left front tire
remove splash guard
remove power steering belt (loosen the pivot bolt and then remove the adjustment bolt so the PS pump swings enough to free the belt)
Then loosen the alternator/AC tensioner pivot bolt, loosen the top alternator bolt and loosen/remove the adjustment bolt.
Swap belts, reverse.

daddy

iTrader: (1)

forgot splash shield since i dont have them lol

thanks for filling in

Maverick

what he said. just dont cut the old belt off. its easier yes, but if somehow you bought the wrong belt youre stuck for a while.