exhuast help!!!
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2007
Location: dededo, guam, guam
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
exhuast help!!!
i have a fren that's selling his "tanabe g-power medalion" on his 1997 2 door integra,and i was planning on getting.but i wanna know if my stock exhaust will fit his integra or if his "tanabe will fit mine".if his tanabe doesnt fit my 05 4dr civic then i'll just bring it to the muffler shop for modifications.wut shud i do?
#2
Re: exhuast help!!! (m2s4drespecial)
The exhaust you are talking about will not fit your model if you are planning on bolting it on direct. The muffler shop would be able to cut the axle back part and bend some pipe to your vehicle specs. The hangers I think would also have to be adjusted. Nice exhaust choice though.Would look sick on the ride. Hope to see pics.
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2007
Location: dededo, guam, guam
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
yea!i've wanting that exhaust...but if that's the case then i'll just mke the shop modify it..i'll post some pics soon.thnks for ur time..just wanted to know..
#4
Honda-Tech Member
Thread Starter
Join Date: Mar 2007
Location: dededo, guam, guam
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
ok.my fren gave me a stock rear section for integra,and he wants to use that stock rear section on the tanabe piping,would it still bolt on?cuz am just gonna get that rear section of the tanabe and have the shop do the modifying.
#5
The original rear section would work,but the flange bolts might be a little bit closer together.I know you would have to use thinner bolts because the gap on the tanabe piping flange is a farther apart.
Thread
Thread Starter
Forum
Replies
Last Post
2kGSboi
Acura Integra
5
01-27-2002 10:01 AM