Door Panel Fabric - What Glue? - Honda-Tech
Go Back   Honda-Tech > Honda and Acura Model-Specific Technical Forums > Honda Civic (2001 - 2005)
Log In 
Search



Door Panel Fabric - What Glue?

Reply
 
 
 
 
LinkBack Thread Tools Search this Thread
Old 03-31-2011, 10:45 AM   #1
Honda-Tech Member
 
realmike15's Avatar
 
Join Date: Sep 2008
Posts: 31
iTrader Rating: (0)
Default Door Panel Fabric - What Glue?

The fabric on the driver side door panel of my '04 Civic started peeling off a few months ago. It looks like the adhesive is finally starting to go and I'd like to repair it before the whole piece peels off.

What type of adhesive do you use to repair this? Should be a very simple fix, just don't know what glue should be used.
realmike15 is offline   Reply With Quote
Old 03-31-2011, 10:52 AM   #2
Honda-Tech Member
 
87 SiviK Si's Avatar
 
Join Date: Sep 2003
Location: Bakersfield, CA
Posts: 234
iTrader Rating: (0)
Send a message via AIM to 87 SiviK Si
Default Re: Door Panel Fabric - What Glue?

Everyone says 3M Super77 is good, but its very temperamental with high/low temps. Go to a upholstery shop and get the glue they use. Its the shizz just did my door panels and armrest on my EG.
__________________
EH rollin', Fat Bottom Girl got it goin' on.

Honda's Past: 91 Std Hatch, 00 LX Sdn, 87 Si Hatch
87 SiviK Si is offline   Reply With Quote
Old 03-31-2011, 03:01 PM   #3
Honda-Tech Member
 
TailZ's Avatar
 
Join Date: Jun 2007
Location: San Jose, CA
Posts: 430
iTrader Rating: (0)
Default Re: Door Panel Fabric - What Glue?

i have to fix mine too..
TailZ is offline   Reply With Quote
Old 03-31-2011, 05:29 PM   #4
Former Moderator
 
It Wasn't Me's Avatar
 
Join Date: Oct 2007
Posts: 7,108
iTrader Rating: (0)
Default Re: Door Panel Fabric - What Glue?

What exactly is your plan? To just glue the part that is already peeling, or removing the whole insert and re-glue it?

I recommend doing the latter, because if you only glue peeling portion back on, the rest will probably continue to come loose and you'll just continue to fight with it.


The 3M Super adhesive sprays (there are a number of them) will probably work, but I'd ask some local shops to see what they use and/or recommend. (as noted)
It Wasn't Me is offline   Reply With Quote
Old 04-01-2011, 04:56 AM   #5
Honda-Tech Member
 
realmike15's Avatar
 
Join Date: Sep 2008
Posts: 31
iTrader Rating: (0)
Default Re: Door Panel Fabric - What Glue?

Quote:
Originally Posted by It Wasn't Me View Post
What exactly is your plan? To just glue the part that is already peeling, or removing the whole insert and re-glue it?

I recommend doing the latter, because if you only glue peeling portion back on, the rest will probably continue to come loose and you'll just continue to fight with it.


The 3M Super adhesive sprays (there are a number of them) will probably work, but I'd ask some local shops to see what they use and/or recommend. (as noted)
I was going to, but it seems to have stopped peeling after a point. It's been like this for at least 3 months, I don't know why I'm just getting around to fixing it now.
__________________
2004 Honda Civic EX (Daily) | 2005 Honda S2000 (Fun)
realmike15 is offline   Reply With Quote
Old 04-01-2011, 05:21 AM   #6
Former Moderator
 
It Wasn't Me's Avatar
 
Join Date: Oct 2007
Posts: 7,108
iTrader Rating: (0)
Default Re: Door Panel Fabric - What Glue?

Hmm.. how big is the peeled portion, and where it is?

If it's one of the ends, just use newspaper and tape to cover the exposed areas, and use the spray-can adhesive.

If it's near the center, like around the door handle, you might want to see if you can find something that can be applied with a brush.



I've used the 3M (spray-can) stuff with positive results, but there are other adhesives available. Just make sure it's right for the application.
It Wasn't Me is offline   Reply With Quote
Old 04-01-2011, 06:12 AM   #7
Honda-Tech Member
 
realmike15's Avatar
 
Join Date: Sep 2008
Posts: 31
iTrader Rating: (0)
Default Re: Door Panel Fabric - What Glue?

Quote:
Originally Posted by It Wasn't Me View Post
Hmm.. how big is the peeled portion, and where it is?

If it's one of the ends, just use newspaper and tape to cover the exposed areas, and use the spray-can adhesive.

If it's near the center, like around the door handle, you might want to see if you can find something that can be applied with a brush.



I've used the 3M (spray-can) stuff with positive results, but there are other adhesives available. Just make sure it's right for the application.
It starts from the top left corner and goes about 1/3 way down, and continues along the top about 3/4 the way across. It's a relatively large area, so I'm not too afraid to use the spray but I'm open to suggestions. I think it might be from pressing against it with my arm every time I open the door. I push the door with my forearm when I open it, and after about 4 years of doing this I think it's taken it's toll on the glue.

I'll post a picture later for a better idea.
__________________
2004 Honda Civic EX (Daily) | 2005 Honda S2000 (Fun)
realmike15 is offline   Reply With Quote
Old 04-04-2011, 08:49 PM   #8
Honda-Tech Member
 
AutoXer's Avatar
 
Join Date: Feb 2004
Location: The Hudson
Posts: 3,622
iTrader Rating: (0)
Default Re: Door Panel Fabric - What Glue?

Quote:
Originally Posted by 87 SiviK Si View Post
Everyone says 3M Super77 is good, but its very temperamental with high/low temps.
We use cans and cans of this stuff at my factory. It sticks even on parts coated with hydraulic fluid. The only thing is it's pretty damn messy and needs to get tacky before you adhere it to anything. I'm not so sure how good it would work on fabric.
AutoXer is offline   Reply With Quote
 
 
 
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
oem fabric adhesive vs aftermarket. raverx3m Tech / Misc 10 01-03-2016 06:50 PM
Terrible Patch Job! JEK715 Honda S2000 2 11-12-2015 08:03 AM
Upholstery coming unglued... JackImpact Paint and Body 6 11-25-2011 03:40 PM
Door Fabric Adhesive - 3M 90 vs. General Trim novacane Acura Integra 1 10-17-2011 05:17 PM
DIY rewrapping door panel inserts shortycm17 Acura Integra 7 10-10-2008 10:58 AM


Tags
3m, adhesive, back, civic, cloth, door, fabric, fix, glue, honda, odyssey, panel, panels, spray, upholstery

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -8. The time now is 02:07 PM.
 


Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.