Cold engine clutch noise.
#1
Honda-Tech Member
Thread Starter
Cold engine clutch noise.
Upon getting in my car to go to the gas station today, the engine was at it's "cold" temprature.
Upon pressing the clutch in, there was a slight squeak/squeal/whine as the pedal got close to the end of it's travel.
But when I got home to look at it, it did not do it while the engine was warmed up.
Now seeing as this clutch system is hydraulic instead of cable activated, what could be the issue. I know it is not the pedal itself, because the sound is coming from the inlet to the transmission where the release fork would be.
Any ideas?
Upon pressing the clutch in, there was a slight squeak/squeal/whine as the pedal got close to the end of it's travel.
But when I got home to look at it, it did not do it while the engine was warmed up.
Now seeing as this clutch system is hydraulic instead of cable activated, what could be the issue. I know it is not the pedal itself, because the sound is coming from the inlet to the transmission where the release fork would be.
Any ideas?
#3
Honda-Tech Member
Thread Starter
Re: (Sean DM)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sean DM »</TD></TR><TR><TD CLASS="quote">mine did the same thing, i replaced the master clutch cylnder and it went away, but now its back.</TD></TR></TABLE>
So that was not the problem obviously. Any more ideas?
So that was not the problem obviously. Any more ideas?
#4
Join Date: Dec 2005
Location: Bakersfield, CA, United States
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Sean DM)
i have the same problem it only does it certain times but my clutch is still good someone told me you could bleed the clutch but im not sure about that.................but it hasnt been doing that for some time now.............
#5
Honda-Tech Member
Thread Starter
Re: (tak1civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tak1civic »</TD></TR><TR><TD CLASS="quote">i have the same problem it only does it certain times but my clutch is still good someone told me you could bleed the clutch but im not sure about that.................but it hasnt been doing that for some time now.............</TD></TR></TABLE>
Honda warranty FTMFW!!!!11!1!1
Honda warranty FTMFW!!!!11!1!1
#6
Honda-Tech Member
Join Date: Dec 2005
Location: Tampa, FL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
heres a link for all the tbs for 7th gens.
http://www.geocities.com/pfeif....html
02-002 is for the sqeaky clutch.
http://www.geocities.com/pfeif....html
02-002 is for the sqeaky clutch.
Trending Topics
#9
Honda-Tech Member
Thread Starter
Re: (Rennen)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rennen »</TD></TR><TR><TD CLASS="quote">all 7th gens are basically the same. u can do it yourself. you just need to grease it up...</TD></TR></TABLE>
Nah. That is what the warranty is for.
Nah. That is what the warranty is for.
#10
Grace Under Pressure
Join Date: May 2006
Location: The Fugitive Motel
Posts: 2,519
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cold engine clutch noise. (.Red.EM2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Red.EM2 »</TD></TR><TR><TD CLASS="quote">
Upon pressing the clutch in, there was a slight squeak/squeal/whine as the pedal got close to the end of it's travel.
</TD></TR></TABLE>
Thank god it's not just mine that does it! Only occaisionally though...
But then my EJ6 and EJ9 did it too, and a lot worse than my EM2.
Upon pressing the clutch in, there was a slight squeak/squeal/whine as the pedal got close to the end of it's travel.
</TD></TR></TABLE>
Thank god it's not just mine that does it! Only occaisionally though...
But then my EJ6 and EJ9 did it too, and a lot worse than my EM2.
Thread
Thread Starter
Forum
Replies
Last Post
Teg44
Acura Integra
4
11-21-2002 08:53 AM